MSW -EW-710 handleiding
Handleiding
Je bekijkt pagina 5 van 21
TECHNICAL DATA
Read instructions before use.
Wear protective goggles.
Wear protective gloves.
ATTENTION! Danger of hand crushing.
2.1. SAFETY AT THE WORKPLACE
a) Make sure the workplace is orderly and well lit.
A messy or poorly lit workplace may lead to accidents.
Try to anticipate what may happen, observe what is
going on and use common sense when working with
the device.
b) This device is not intended to be used by persons
(including children) with limited physical, sensory
or mental aptitude or lack of experience and/or
knowledge, unless they are supervised by a person
responsible for their safety or have received instruction
from this person as to how the device is used.
c) The device may be operated by physically t persons
who are properly trained and able to handle the
device and who reviewed this operating manual and
received training in occupational health and safety
d) When any device damage or abnormal operation
is found, stop its use immediately and notify an
authorised person.
e) In case of doubt whether the product operates
correctly or nding damage please contact the service
centre of the manufacturer.
f) Only the service centre of the manufacturer can make
repairs of the product Do not attempt to make repairs
yourself!
g) Children or unauthorised persons are forbidden from
entering a work station. (A distraction may result in
a loss of control over the device).
h) During workpiece working, take care of strangers and
their safety.
i) Observe the workpiece carefully during working to
avoid its damage and prevent any possible hazard.
j) Maintain order and remove any dust, debris and waste
materials after working.
k) If more elements are manufactured, they should be
stored in such a way before and after working that
allows keeping order at the workstation.
2.2 PERSONAL SAFETY
a) Do not use the device when tired, ill or under the
inuence of alcohol, narcotics or medication which
can signicantly impair the ability to operate the
device.
b) When working with the device, use common sense
and stay alert. Temporary loss of concentration whilst
using the device may lead to serious injuries.
c) Use personal protection equipment as required
for working with the device, specied in section 1
(Legend). The use of correct, approved personal
protection equipment reduces the risk of suering an
injury.
d) Do not overestimate your abilities. When using the
device keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
e) Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
f) Before device operation, remove all regulating tools
or wrenches. Any tool or wrench left inside a rotating
part of the device can result in injuries.
g) The material to be worked should be free of impurities.
Parameter
description
Parameter value
Product name English Wheel
Model MSW-
EW-360
MSW-
EW-560
MSW-
EW-710
Dimensions
[mm]
625
x660
x150
1505
x670
x810
1505
x820
x810
Clearance [mm] 360 560 710
Maximum
thickness of the
worked material
[mm]
0,8 1,5 1,5
Weight [kg] 14 70 75
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies and
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
a trouble-free operation, use it in accordance with this user
manual and regularly perform the maintenance tasks. The
technical data and specications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
Legend
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may
dier from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
Whenever "device" or "product" are used in the warnings
and instructions, it shall mean English Wheel. Do not
exceed the maximum thickness of the worked material!
REMEMBER! When using the device, protect children
and other bystanders.
h) Do not touch any movable parts or accessories
during device operation.
i) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
j) Use protective gloves to avoid being hurt by sharp
edges.
2.3. SAFE DEVICE USE
a) Do not overload the device. Use appropriate tools
for the given task. A correctly selected device will
perform the task for which it was designed better
and in a safer manner.
b) When not in use, store in a safe place, away from
children and people not familiar with the device, who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c) Maintain the device in a good technical state. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
d) Keep the device out of the reach of children.
e) Device repair or maintenance should be carried out
by qualied persons, only using original spare parts.
This will ensure safe use.
f) To ensure the operational integrity of the device, do
not remove factory tted guards and do not loosen
any screws.
g) Use the device to work elements of parameters
conforming with the data given in the technical data
table. Do not exceed the permissible dimensions of
the worked material.
h) When transporting and handling the device between
the warehouse and the destination, take into account
the occupational health and safety principles for
manual transport operations which apply in the
country where the device will be used.
i) Do not work two workpieces at the same time.
j) Long workpieces must be supported and set stably
for working.
k) Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
l) It is recommended to carry out some trial work with
the device before you start working with the proper
workpiece.
3. USE GUIDELINES
The English Wheel is designed to shape cylindrical sheet
elements such as e.g. gutters, bumpers, mudguards.
The user is liable for any damage resulting from non-
intended use of the device.
3.1. DEVICE DESCRIPTION
A description of the device elements marked in the
drawings below is found at the end of the manual in the
tables under the assembly drawings.
MSW-EW-360
MSW-EW-560
MSW-EW-710
3.2. PREPARING FOR USE
Appliance location:
The device shall always be used on an even, stable, clean
and dry surface and out of reach of children and persons
of unsound mind. The surface where the device will be
used must be able to withstand its weight and weight of
workpieces and any additional tools.
• Ensure a free space of 1 m around the device to avoid
damages.
• The operator should have enough space to operate
the device.
13
2
12
5
9
14
1
2
1
8
5
17
13
19
15
18
16
20
14
7
6
4
1
2
8
36
5
33
7
6
4
1514
21
20
16
15
18
17
19
13
12
USER MANUAL
Rev. 27.07.2018
8
Rev. 27.07.2018
9
Bekijk gratis de handleiding van MSW -EW-710, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -EW-710 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4319 MB |
