MSW -EBNR-1500 handleiding
Handleiding
Je bekijkt pagina 7 van 76
EN
This User Manual has been translated using machine translation. We have made every effort to ensure the translation
is accurate, but please note that automated translations are not perfect and are not meant to replace human
translators. The official version of the User Manual is in English. Any differences between the translated version and the
original English are not legally binding. If you have any questions about the accuracy of the translation, please refer to
the English version, which is the official reference. More language versions are available upon request via
info@expondo.com.
Technical data
Parameter
description
Parameter
value
Product name
Electric bending
Model
MSW-EBNR-1500
Rated voltage [V~] / Frequency [Hz]
230 / 50
Rated power [W]
1200
IEC Protection class
II
Insulating grade
F
Protection rating IP
IPX0
Duty cycle
S1
Bending capacity [mm]
8-20
Bending speed [sec]
3-5
Dimensions [Width x Depth x Height; mm]
600 x 150 x 190
Weight [kg]
13.45
I. Precautions for operating the portable rebar bending machine
Before using the portable rebar bending machine, read this manual thoroughly. Follow all safety instructions to ensure proper
and safe operation. The methods and safety precautions outlined here apply only to the machine’s intended use as specified in
this manual. Users are responsible for any safety issues arising from improper usage or operations not described in this manual.
This manual uses specific headings to highlight critical information:
• Warning: Indicates precautions to avoid personal injury due to misuse.
• Note: Indicates precautions to prevent machine damage or failure due to misuse.
(1) Warning
1. Do not use this machine for purposes other than those described in this manual.
2. Follow the instructions in this manual for safe and correct operation. Keep children and untrained individuals away from
the machine. Only trained personnel should operate this machine, and they must receive proper instruction before use.
3. Avoid using the machine in rain, wet areas, or places with standing water, as moisture can reduce motor insulation and
cause electric shocks.
4. To prevent electric shocks, use an earth leakage circuit breaker and ensure the machine is correctly grounded.
5. Avoid touching grounded objects like conduits, heating appliances, water tanks, etc., while operating the machine to
prevent electrical hazards.
6. Keep the workspace well-lit, clean, and organized to prevent accidents.
7. The machine can emit sparks, particularly when the switch is engaged or disengaged. Avoid using it near flammable
substances (e.g., paint, gasoline, volatile oils) and in poorly ventilated areas.
8. Ensure that unrelated individuals, especially children, stay clear of the work area. Avoid handling power tools or wires
unless necessary.
9. Wear appropriate clothing. Avoid loose-fitting clothes, jewelry, or accessories that could be caught in the machine.
10. For safety, wear a helmet and rubber-soled safety shoes.
11. Wear protective goggles to protect your eyes. In dusty conditions, use additional dust collection and protection.
12. Check all screws before use. Tighten any that are loose and replace any missing or fallen screws.
13. Store tools (e.g., screwdrivers, wrenches, pliers) safely after use. Forgotten tools can become dangerous projectiles
when the machine starts.
14. Use the specified voltage for the power supply. High voltage can damage the machine and motor, while low voltage can
cause motor failure.
15. Ensure the power switch is off before plugging in the machine to avoid accidental startup.
16. Do not handle the machine while it is plugged in, as accidental engagement can cause injuries.
17. Work in a stable stance, paying attention to your footing. Poor posture can increase the risk of accidents.
18. If you notice abnormal operation or poor machine condition, stop immediately and inspect the machine.
19. Avoid overloading the machine or using accessories beyond their capacity, as improper use is both dangerous and
damaging.
20. Do not touch the bent head, rotating parts, or debris while the machine is running.
Bekijk gratis de handleiding van MSW -EBNR-1500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -EBNR-1500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12460 MB |
