MSW -CCSE-3500.350W handleiding
Handleiding
Je bekijkt pagina 7 van 18
EN
m) Clean the device regularly to prevent stubborn grime from accumulating.
n) Do not work on two workpieces at the same time.
o) The device is not a toy. Cleaning and maintenance may not be carried out by children without
supervision by an adult person.
p) Do not run the device when empty.
q) It is forbidden to interfere with the structure of the device in order to change its parameters or
construction.
r) Keep the device away from sources of fire and heat.
s) Do not cover the ventilation openings!
t) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
u) Grinding wheels shall not be used.
v) Do not operate with the fixed shield removed.
w) Do not start the cutter when the cutting is in contact with the workpiece.
x) After the cutting machine is powered off, do not put down the cutting machine before the cutting
blade stops completely, and do not use any external force to force the diamond saw blade to stop
running.
y) Before replacing the cutting blade, adjusting the cutting depth or water pipe, adjusting any part of the
machine or repairing the cutting machine, the plug should be pulled off from the power supply and the
diamond saw blade should be in a static state.
z) When the diamond saw blade is likely to cut to the dark wire or its own wire for operation, the power
tool can only be held through the insulated holding surface. The diamond saw blade touching the live
wire may make the exposed metal parts of the electric tool live and the operator may be exposed to
the risk of electric shock.
aa) Take extra care when making "blind cuts" into walls or other blind areas. Diamond saw blades may cut
gas or water pipes, wires or objects rebounded from them.
bb) Keep your hands away from the cutting area or diamond saw blade at all times. Your other hand
always holds the assist handle. If you hold the cutter with both hands, you will not be hurt by the saw
blade.
cc) Do not touch the bottom of the workpiece. The shield cannot protect the saw blade under the
workpiece.
dd) Always use a diamond saw blade with the proper size and axis shape (diamond or circular). If the
diamond saw blade does not match with the clamping parts of the cutting machine, it will cause
eccentric operation and cause out of control.
ee) Do not use damaged and non-dimensional washers and bolts. The use of damaged or non-conforming
gaskets and bolts can result in uncontrolled operation.
ATTENTION! Despite the safe design of the device and its protective features, and despite the use
of additional elements protecting the operator, there is still a slight risk of accident or injury when
using the device. Stay alert and use common sense when using the device.
Bekijk gratis de handleiding van MSW -CCSE-3500.350W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -CCSE-3500.350W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3677 MB |
