MSW -CA-0001D handleiding
Handleiding
Je bekijkt pagina 18 van 264

EN
d) Use the cable only for its designated use. Never use it to carry the machine or to pull the plug out of a
socket. Keep the cable away from heat sources, oil, sharp edges, or moving parts. Damaged or tangled
cables increase the risk of electric shock.
e) If working with the machine outdoors, make sure to use an extension cord suitable for outdoor use.
Using an extension cord suitable for outdoor use reduces the risk of electric shock.
f) If using the machine in a damp environment cannot be avoided, a residual current machine (RCD)
should be applied. The use of an RCD reduces the risk of electric shock.
g) Do not use the machine if the power cord is damaged or shows obvious signs of wear. A damaged
power cord should be replaced by a qualified electrician or the manufacturer’s service centre.
h) To avoid electric shock, do not immerse the cord, plug, or machine in water or other liquids. Do not
use the machine on wet surfaces.
i) ATTENTION! DANGER TO LIFE! While cleaning, never immerse the machine in water or other liquids.
j) Do not use in very humid environments or in the direct vicinity of water tanks.
k) Prevent the machine from getting wet. Risk of electric shock!
2.2. Safety in the workplace
a) Make sure the workplace is clean and well-lit. A messy or poorly lit workplace may lead to accidents.
Try to think ahead, observe what is going on and use common sense when working with the machine.
b) Do not use the machine in a potentially explosive environment, for example in the presence of
flammable liquids, gases or dust. The machine generates sparks which may ignite dust or fumes.
c) If you discover damage or irregular operation, immediately switch the machine off and report it to a
supervisor without delay.
d) If you are unsure about whether the product is operating correctly or if you find damage, please
contact the manufacturer’s service centre.
e) Only the manufacturer’s service centre may make repairs to the product. Do not attempt to make
repairs yourself!
f) In case of fire, use a powder or carbon dioxide (CO
2
) fire extinguisher (one intended for use on live
electrical machines) to put it out.
g) Children or unauthorized persons are forbidden to enter a workstation. A distraction may result in loss
of control over the machine.
h) Use the machine in a well-ventilated space.
i) The machine produces dust and debris during operation. It is important to protect bystanders from
their harmful effects.
j) Do not cut off the supply of compressed air by crushing or bending pressure hoses.
k) Use the “EMERGENCY STOP” if there is a risk of injury or death, accident, or damage.
l) Regularly inspect the condition of the safety labels. If the labels are illegible, they must be replaced.
m) Please keep this manual available for future reference. If this machine is passed on to a third party, the
manual must be passed on with it.
n) Keep packaging elements and small assembly parts in a place not available to children.
o) Keep the machine away from children and animals.
Bekijk gratis de handleiding van MSW -CA-0001D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -CA-0001D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 70913 MB |







