MSW -C&A HP MX2 handleiding
Handleiding
Je bekijkt pagina 9 van 87
EN
1. Setting the temperature:
a. Press “OK” button (3).
b. The display show “P-1”.
c. Press arrows “△” (2) or “▽” (4) to set the desired temperature.
2. Setting the time
a. Press “OK” button after setting temperature, display shows “P-2”.
b. Press arrows “△” (2) or “▽” (4) to set the desired time.
c. Press “OK” button after time setting.
3. Change of temperature units
a. Long press the “OK” button, the display will show “P-3”.
b. Press arrows “△” (2) or “▽” (4) to change between the Celsius and Fahrenheit.
c. Press the “OK” button key to save settings.
4. Pressure adjustment
If there is still a gap between cups and heater, then adjust suitable pressure until heater wraps cup
tightly.
Clockwise rotation increases pressure.
Counterclockwise rotation reduces pressure.
5. Recommended settings
Material Machine Status Time Temperature
Stainless
Tumbler
Cold (≤60°C) 130s~150s 170°C ~175°C
Hot (＞60°C)
90s/90s+30s 180°C -185°C
Porcelain
Mug
Cold (≤60°C) 300s 190°C ~200°C
Hot (＞60°C)
200s 190°C ~200°C
Compatible Diameter: 6.8 ~ 8.7cm (According to your choice).
Max. Printable Length: 12cm.
Suitable For: Most 11oz or various kinds of mugs.
Note: The parameters above are for reference only, please test to find the best parameters for your
own mugs.
Note: For your first operation, it’s recommended that you adjust the temperature and time before
putting the mug. Due to the unfamiliar operation and the actual pressing time for too long, it’s easy
to get a toasted image.
6. Working method
a. Clean the tumbler surface and cut the image as per your design.
b. Wrap the sublimation paper firmly secured flush against the mug by heat tape.
c. Put a blank mug in the centre of heating element.
d. Adjust the pressure knob to a suitable pressure until the cup or mug fits snugly
against the heating attachment.
e. When the temperature was reaching the desired temperature, take out the preheat
mug, and put the mug with the sublimation paper in the centre of the heating
element.
f. When the time is up, the device alarms, the cups can be removed.
Bekijk gratis de handleiding van MSW -C&A HP MX2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -C&A HP MX2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16246 MB |
