MPM MWP-26/C handleiding

26 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 9 van 26
9
EN
-
Do not switch on the appliance without front and rear guard
mounted.
- The appliance may be switched on only aer complete assembly.
Parally assembled unit does not provide safe and proper operaon.
-
The appliance shall be plugged to an outlet with a protecve earth
pin.
- Do not plug the power cord with wet hands.
- This appliance is intended for household use only.
- Do not remove the plug from the mains by pulling by the cord.
- Store the appliance and its cord out of reach of children under 8
years of age.
-
In order to ensure your children‘s safety, please keep all packaging
(plasc bags, boxes, polystyrene etc.) out of their reach.
-
Before removing the cover, make sure that the fan is disconnected
from the power source.
- WARNING! Do not allow small children to play with the foil as
there is a danger of suocaon!
DEVICE DESCRIPTION
1. Control touch panel
a. ON/OFF buon
b. Timer buon “Timer”
c. oscillaon buon “Osc”
d. buon to select the working
mode “Mode”
e. Speed select buon „Speed”
2. Display
3. Air exhaust
4. Fan base
5. Air intake
6. Fine assembly base
7. Blocking Nut
8. Carrying handle with remote control
holder
9. Power cable
10. Remote
PREPARING THE DEVICE FOR OPERATION
1. Remove the fan from the box; remove all sckers, transport protectors, bags and llers.
2. Check the fan for any damages that might have occurred during transport. If you have any doubts,
contact the seller.
3. Before starng to use the device, mount the two-piece base (4) and aach it to the fan boom.
4. Drop the locking nut (7) from the foundaon mounng thread (6) . Place the rst half of the base
(4) on the roller and move the power cable to the output channel, making sure it ts the clamps
and is equal to the base boom.
5. Then mount the second half of the base (4) around the sha and on the rst half of the base,
aligning the clamps. Press the clamps of the two parts of the base ensuring they are ghtly locked.
6. Put the locking nut (7) on the threaded roller (6).

Bekijk gratis de handleiding van MPM MWP-26/C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkMPM
ModelMWP-26/C
CategorieVentilator
TaalNederlands
Grootte4713 MB