MPM MOD-55 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126/ 126

Afdrukken

Je bekijkt pagina 27 van 126

27

EN

DESCRIPTION OF THE APPLIANCE

1. On/Off button

2. Power cord retractor button

3. Display

4. Suction power controller button (+)

5. Suction power controller button (-)

6. Accessory compartment lid

7. Accessory compartment lid button

8. Suction hose connection hole

9. Suction hose

10. Suction hose retaining ring

11. Suction hose holder

12. Control panel in the suction hose

holder

13. Battery cover

14. Battery location

15. Telescopic tube

16. Carrying handle

17. Top cover

18. Upper lid opening button

19. Parking space

20. Motor sponge filters x 2 pcs

21. HEPA filter

22. Outlet sponge filter

23. Outlet filter protection grille

24. Dust bag

25. Dust bag rack

26. Lower casing

27. Small front wheel

28. Large rear wheels

29. Floor and carpet brush

30. Small brush

31. Crevice attachment

32. Floor brush

33. Small turbo brush

34. Small turbo brush adapter

35. Long crevice attachment

36. Power cable

NOTE: THE REMOTE CONTROL PANEL IS POWERED BY TWO AAA/LR03 1.5V

BATTERIES. THE BATTERIES ARE NOT SUPPLIED WITH MOD-55.

ASSEMBLY OF THE APPLIANCE

1. Press the two latches on the sucon hose retaining ring (10), then insert the ring into the hole (8)

and release the latches. In order to disassemble these elements press the latch and remove the

ring (10) from the hole (8).

2. On the other side of the sucon hose (11), connect the telescopic tube (15). At the end of the

telescopic tube (15) put on one of the sucon aachments (29), (30), (31), (32), (33+34) or (35).

3. Remove the baery cover (13) in the sucon hose holder (11) and install two AAA/LR03 1.5V

baeries in the baery mounng locaon (14). Baeries are not part of equipment of the vacuum

cleaner.

Reaach the baery cover (13).

4. Changing the length of the telescopic tube (15) is possible by pressing the ring in the centre of the

telescopic tube.

USING THE APPLIANCE

1. Before switching on the vacuum cleaner, unfold the power cord (36) to the appropriate length and

insert the plug into the mains socket. When unfolding the cord, do not press the cord retractor

buon (2).

2. Press the switch buon (1) to switch on the vacuum cleaner.

3. To retract the power cord, press the cord retractor buon (2) and hold the cord to prevent sudden

shuing that could damage the cord.

4. While vacuuming, you can adjust the sucon power using the buons (4) and (5) and the control

panel located in the sucon hose holder (12). The vacuum cleaner’s display (3) shows the current

sucon power level, which is indicated by numbers from 1 to 5 and symbols that show, by way of

example, what the recommended power levels are for:

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126/ 126

Bekijk gratis de handleiding van MPM MOD-55, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van MPM (Stofzuiger)

Handleiding bekijken

MPM MOD-1000

Stofzuiger - handleiding

Andere merken in Stofzuiger