MPM MOD-49 handleiding
Handleiding
Je bekijkt pagina 23 van 54
23
EN
12. Aer each use of wet vacuuming and cleaning mode, the sponge lter should be washed with
water and dried prior to next use (Fig. 12).
CAUTION! Do not pour water into the tank when using the wet vacuuming and cleaning func
-
on! This container will gradually ll with water during the process of its collecon.
FUNCTIONS MANUAL
1. Press the cold water wash buon on the main cover panel, the indicator light will illuminate. Press
the sucon mode buon on the handle of the remote control and the unit will start vacuuming.
Then press the spray buon on the handle of the remote control and the nozzle of the large steam
aachment or the small washing aachment will start spraying water. Due to the large distance
of water from the tank to the aachment, wait about 5 seconds while the unit sprays water and
absorbs clean/dirty water at the same me (Fig.1).
CAUTION! Lacking level of cleaning liquid in the container during the washing mode should
be immediately lled. Do not turn the liquid feeding process at idle (without liquid) in order to
prevent pump damage.
2. Press the hot water wash buon on the main cover panel, the indicator light will illuminate. Press
the sucon mode buon on the handle of the remote control and the unit will start vacuuming.
Then press the spray buon on the handle of the remote control and the nozzle of the large steam
aachment or the small washing aachment will start spraying water. Due to the large distance of
water from the tank to the aachment, wait about 5 seconds while the unit sprays hot water and
absorbs clean/dirty water at the same me (Fig.2).
CAUTION! Lacking level of cleaning liquid in the container during the washing mode should
be immediately lled. Do not turn the liquid feeding process at idle (without liquid) in order to
prevent pump damage.
3. Press the hot steam wash buon on the top cover panel, the indicator light will illuminate. Press the
sucon mode buon on the handle of the remote control and the unit will start vacuuming. During
this me, the central heang/no water indicator light on the main cover panel is ashing, the water
is pre-heang. Wait approximately 15 seconds, the central heang/no water indicator light will
go out. Then press and hold the water spray buon on the handle of the remote control without
releasing (release the water spray buon, the washing aachment will stop spraying steam), the
large steam aachment or the small washing aachment will start spraying steam. The unit will
simultaneously spray hot steam and absorb clean/dirty water (Fig.3).
Bekijk gratis de handleiding van MPM MOD-49, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MPM |
| Model | MOD-49 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 10545 MB |
