MPM MOD-1000 handleiding
Handleiding
Je bekijkt pagina 6 van 34
6
EN
ASSEMBLY OF THE DEVICE
1. Unpack the device and remove all llers, sckers and bags.
2. Check that the hair container and all lters are correctly ed. You will nd a detailed descripon
of the assembly and disassembly of these components in the chapter “FILTERS CLEANING”.
3. Pressing down, insert the end of the sucon hose (15) into the air outlet (3) or air inlet (10) and twist
clockwise unl you feel resistance. To remove the sucon hose (15), proceed in reverse.
4. Connect the other side of the sucon hose (15) to the appropriate equipment (16), (17), (18), (19),
(20) depending on your pet’s grooming needs.
USING THE DEVICE
1. Before switching on the vacuum cleaner, unfold the power cord (4) to the appropriate length and
insert the plug into the mains socket.
2. Turn the power knob to the ON posion (1a) to switch on the vacuum cleaner.
3. During the operaon of the device, select the opmal sucon power with the sucon power
regulator knob (1). Three modes are available: Silent, Standard and Strong. Gently run the brush
through your pet’s hair in an even moon. When using it for the rst me, we suggest starng in
Silent mode (1b).
4. The device is equipped with a dryer funcon. Connect the sucon hose to the air outlet (3), t the
drying nozzle (19) and press the buon (2) to acvate the warm air mode.
5. Keep the dust container level under regular control (9). The overlling of the container will result in
the weakening of the sucon power and the fast soiling of the lters.
CAUTION! If you sense a loss of suction power in the vacuum cleaner then clean the
hair container and/or unblock the suction hose.
CAUTION! The device is equipped with overheating protection. If it switches off after
prolonged operation, leave it to cool down for about 60 minutes.
6. To opmally posion the device aer use, use the sucon hose parking space (6) in the horizontal
posion located on the side of the vacuum cleaner next to the hair container (9).
7. To coil up the power cable (4), wrap it in the space provided for winding up the power cable (5).
CAUTION! Vacuuming certain surfaces in low humidity conditions may cause the de-
vice to become slightly electrified. This is a natural phenomenon, which does not dam-
age the device and is not a defect. In order to minimise this phenomenon, it is recom-
mended to: discharge the device by frequently touching metal objects in the room with
the pipe, increase the air humidity in the room, use generally available anti-electrostatic
agents.
Bekijk gratis de handleiding van MPM MOD-1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MPM |
| Model | MOD-1000 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 5095 MB |
