Handleiding
Je bekijkt pagina 28 van 98
28
EN
Appetizer type
Maximum time of continuous
operation
Mixing attachment (4) 60 s
Whipping attachment for egg whites, light creams
and sauces (3)
2 min
Shredding and chopping kit (knive) (8) 40 s
Set for grinding and cutting (double-sided disc)
(10)
2 min
CAUTION! After completing one work cycle, turn off the device and wait at least 3
minutes until it cools down.
SHREDDING AND CHOPPING SET KNIFE ASSEMBLY
Place the container (11) on a dry and stable surface. Remove the cover (5) from the contain
-
er (11) by pushing the two lock buttons (6) on the cover outwards. Then put the chopping
knife (8) on the pin protruding from the container bottom, and then put the cover on so
that the tip of the chopping knife fits the cover. After ensuring that all parts are assembled
correctly, insert the blender housing (1) into the mounting socket in the cover by turning it
counterclockwise.
GRINDING AND CUTTING SET ASSEMBLY DOUBLESIDED DISC
Place the container (11) on a dry and stable surface. Remove the cover (5) from the con
-
tainer (11) by pushing the two lock buttons (6) on the cover outwards. Next, attach the
tapping pin (9) to the pin protruding from the centre of the bottom of the container, and
then attach the pin and the disc (10) (mind the appropriate side, depending on the activity
being performed, i.e. abrasion/cutting).
Place the cover so that the tip of the disc (10) fits the cover (5). After ensuring that all
parts are assembled correctly, insert the blender housing (1) into the mounting socket in
the cover by turning it counterclockwise.
PUSH BUTTON TO START AND ADJUST BLENDER SPEED
Once you have ensured that all components are correctly assembled, connect the
appliance plug to the power source.
To start the blender, press the speed control button (2) gently. The appliance will start
at low speed. Continuing to press the button (2) increases the speed of the blender.
Releasing pressure on the button (2) stops the blender.
CLEANING AND MAINTENANCE
CAUTION! The blades’ cutting edges are sharp Risk of possible injury! Use with cau-
tion!
1. Prior to cleaning, remove the plug from the power socket.
2. Before and after each use, disassemble the device’s components and wash it thoroughly in
warm water with the addition of detergent, then rinse thoroughly and dry.
3. Periodically check parts before reassembling. Do not use the blender if the knives of blender
blades (4) are jammed or rotate with difficulty.
Bekijk gratis de handleiding van MPM MBL-39M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MPM |
| Model | MBL-39M |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 10794 MB |
