Handleiding
Je bekijkt pagina 25 van 48
25
EN
OPERATION
The operation of the freezer is controlled by the appliance’s thermostat knob (the knob is
moved clockwise from the minimum to the maximum position, back and forth with the use
of a coin).
NORMAL
MINIMUM
MAXIMUM
THERMOSTAT REGULATOR
The thermostat control located on the control panel regulates the temperature of the freezer
compartment.
“Minimum” setting – cold
“Normal” setting – colder, standard setting
“Maximum” setting – coldest (freezing fresh food)
This temperature is aected by:
Room temperature
Door opening frequency
Amount of food stored
Device setting
All these factors must be considered when setting the correct temperature. Initial trials may
be necessary.
TEMPERATURE SELECTION
A higher position of the thermostat knob (closer to “maximum”) means a lower temperature
in the freezer. For normal ambient temperatures, it is recommend to place the knob at the
medium (“normal”) position.
A change in the ambient temperature aects the temperature inside the freezer. Adjust the
setting of the thermostat knob to the conditions outside.
The temperature inside the freezer also depends on how often the door is opened.
STARTING THE DEVICE
1. Leave the device for 2 hours after mounting.
2. Connect the device to the network and turn it on.
3. Turn the thermostat knob to the desired setting. The middle setting corresponds to normal
operation (see thermostat control).
4. Before placing the food inside, leave the appliance for about 4 hours and allow it to reach the
correct temperature.
Bekijk gratis de handleiding van MPM -100-ZS-11, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MPM |
| Model | -100-ZS-11 |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 4364 MB |
