Mount-It! MI-SB434 handleiding

Handleiding

12345/ 5

Afdrukken

Je bekijkt pagina 3 van 5

5

4

• With a stud finder locate the stud and hold the Wall Bracket(#A) on the stud in the desired location and

use a pencil to mark the 3 mounting holes. Use a 1/8” (3.5mm) bit and drill on the marked locations to a

depth of 2” (50mm). Secure the mount to the wall using the Lag Screws (#F).

Wood Stud Installation Option

Step 1a

• Hold the Wall Bracket(#A) to the wall in the desired location and use a pencil to mark the 3 mounting

holes. Use a 5/16” (8mm) bit and drill on the marked locations to a depth of 2”(50mm). Insert the

Concrete Anchors (#G) into the holes, then secure the mount to the wall using the Lag Screws (#F).

Concrete/Brick Installation Option

Step 1b

Note: Ensure the Wall Bracket is centered on the stud so that both of the lower screws are installed into

the stud.

1.14"

12345/ 5

Bekijk gratis de handleiding van Mount-It! MI-SB434, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Speaker