Moulinex Perfectmix Cook LM83SD handleiding

Blender

Moulinex

49 pagina's

PDF beschikbaar

Handleiding

4 5

MANUAL FUNCTIONS:

•

Pulse: Press the pulse button to

let the appliance run for only a

few seconds at a time. To stop

it, release the button. Press the

pulse button as often as it is necessary.

The longest working time can not be

more than 3 minutes.

•

Blend: select blend program on

screen then choose the speed

setting with + and – buttons,

validate with Start/Stop button.

Then choose timer, default time 2 min and

adjut with + and – buttons, validate with

Start/Stop button the programm will start

immediatly. At the end of the program,

the appliance bips 5 times.

•

Heat : allows to freely control

the way you want to heat. Press

the heat button, the screen

indicates « 75° » but you can

choose the heating temperature from 40°

up to 100° by selecting + and – buttons.

Then press Start/Stop button.

You can set up the working time by

selecting + and - buttons between 5

minutes and 90 minutes, the screen

indicate default time : 10 minutes. Then,

press Start/Stop button.

The remaining time appears on the screen.

Wait for the blender to stop automatically.

The appliance beeps 5 times. You can

also stop the blending during the cycle :

Within 1 minute of working, press the

start/stop button

More than 1 minute of working, press and

hold the start/stop button for 3 seconds.

• Steam*: Add the ingredients in

the steam basket. Add 500ml of

water in the jar. Then add the

steam basket in the jar and

close the lid. Maintain heat /steam button

for 2 seconds. The pictogram will become

yellow You can set up the working time by

+ and -buttons, between 5 minutes and 90

minutes. Then press Start/Stop button. The

remaining time appears on the screen.

Wait for the blender to stop automatically,

The appliance bips 5 times.

For safety

reasons, remove the cap and wait

1 minute to remove excess steam.

*Depending on model

OTHER FUNCTIONS

•

Start/Stop : allows to stop any

blending or heating program

before the end by pressing this

button.You can also stop the

blending during the cycle :

- within 1 minute of working, press the

start/stop button

- more than 1 minute of working, press

and hold the start/stop button for 3 seconds

If the appliance switches off during

operation, proceed as follows :

- Unplug and leave it to cool down for

approximately 15-20 minutes.

- Reconnect the appliance to the power

supply and resume blending.

- The appliance will keep the program in

memory for 3min if stopped.

•

You can use the brush to clean the

blade holder. Be careful, the blades

are very sharpened.

Caution:

•

Empty the preparation, the jug is

not meant for storing food in the

refrigerator or freezer.

•

To clean the outside of the motor

unit and the walls of the jug, use a

damp cloth.

•

Do not immerse the appliance in

water (neither the motor unit nor

the blade holder). Never put the

motor unit (D) under running water.

•

Refer to the cleaning table to check

how to clean each part.

•

Clean the jug immediately after use.

•

For easy cleaning, you can use.

Deep clean: Put 800ml of water in

the jug. Select the cleaning program

on the screen and press Start/Stop

button Wait for the end of program.

Finish cleaning the jug with the help of

a sponge.

•

Rinse the inside of the jug and the lid

under running water.

•

In the event of the heated part of

the jug getting extremely dirty, ll

in the jar with a mix of water and

washing up liquid and let it soaked

for a few hours to help get it clean.

•

Use a damp cloth to clean the motor

Unit. Dry it carefully.

CLEANING

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?

Problems Causes Solutions

Appliance does not

work

The plug is not connected.

Connect the appliance to a

socket with the same voltage

as indicated on the rating

plate of the appliance.

The blender jug is not

positioned correctly on the

motor unit or the jug and lid

are correctly in place and are

not locked onto the motor unit.

Check that the blender jug

and the lid are positioned

properly on the motor unit as

explained in the instructions.

Appliance, keypboard or

program not responding

Unplug the appliance, wait for

1 minute and plug in again.

In case of overheating

Unplug and leave it to cool

down for approx.15-20 minutes.

The appliance stopped

while in use

Overload or overheating

Unplug and leave it to cool

down for approx.15-20 minutes.

Reconnect the appliance to

the power supply and resume

blending.

Excessive vibrations

The product is not placed on a

at surface.

Place the appliance on a at

surface.

Volume of ingredients is too

high.

Reduce the quantity of

ingredients processed.

Leak or overow from

the lid

Volume of ingredients is too

high.

Reduce the quantity of

ingredients processed.

The lid is not correctly

positioned.

Place the lid correctly on the

blender jug.

The seal of the lid is not

correctly positionned, or is

missed.

Put the seal in the correct

position.

Leak from the bottom of

the blender jug

Deterioration of the

watertightness of the

appliance.

verify the blade holder is

correctly put in place and

the interface between blade

holder / jug is totally clean.

If the problem persists, contact

the consumer service (see

contact information in the

warranty leaet)

Bekijk gratis de handleiding van Moulinex Perfectmix Cook LM83SD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.