Moulinex Perfect Mix Plus LM81GD handleiding

Blender

Moulinex

50 pagina's

PDF beschikbaar

Handleiding

6160

• Remove the Blade Unit + Locking Ring + Seal (F1 + F2 + F3 / O1 + O2

+O3) and clean them under running water. The blades are very sharp,

handle them with caution to avoid injury (Fig.10).

• After cleaning, remember to correctly ﬁt the seal (F3, O3) back onto the

blade unit (F1, O1) (Fig. 17). Please be careful to avoid any damage to

the seal by touching the blades.

Note: Incorrectly ﬁtting the seal can result in ingredients leaking from

the base of the blender jug.

• Rinse the inside of the jug and the lid under running water.

• Take care when cleaning the blades in the blender jug and when you

empty the jug as they are sharp.

• Use a damp cloth to clean the motor unit (A). Dry it carefully.

• The detachable parts (lid, blade unit, locking ring,) can be cleaned with

a sponge and hot soapy water.

• The jug (F4, O4), blade unit without titanium coating (F1), locking ring

(F2, O2) can be cleaned in the dishwasher on the upper rack - use the

‘ECO’ or ‘LOW SALT’ program.

• Caution: The jug (F4, O4), blade unit without titanium coating (F1) and

locking ring (F2, O2) must be disassembled and placed separately in the

dishwasher. Please do not put the blades with titanium coating (O1) in

the dishwasher.

PROBLEMS CAUSES SOLUTIONS

Appliance does not work

The plug is not connected

Connect the appliance to

a socket with the same

voltage as that on the rating

plate of the appliance.

The blender jug is not

positioned correctly on the

motor unit

Check that the blender jug

is positioned properly on the

motor unit as explained in

the instructions.

The appliance stopped

while in use

Overload

Follow the instructions in section

USING YOUR BLENDER.

The cooling time is

variable and can last up to

30minutes

Excessive vibrations

The product is not placed

ona ﬂat, stable surface

Place the appliance on

a ﬂat surface.

Volume of ingredients is

too high

Reduce the quantity of

ingredients processed.

Leak from the lid

Volume of ingredients is

too high

Reduce the quantity of

ingredients processed.

The lid is not correctly

positioned

Place the lid correctly on the

blender jug.

Leak at the bottom of the

blender jug

The blender seal (F3 / O3)

isnotpositioned correctly

orisabsent

Reposition the seal with the

correct side uppermost (Fig. 1)

and lock the assembled blade

unit (F1+F2+F3 / O1 + O2 +O3)

onto the blender jug correctly

(Fig. 2, Fig. 3 & Fig. 4 / Fig. 9, Fig.

10 & Fig. 11)

The blade does not turn

easily

Pieces of food are too large

or too hard. Liquid has been

blended that was too hot

and has distorted the seal

Replace the seal with a

new one. Reduce the size

or quantity of ingredients

processed. Add liquid.

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK

YOUR APPLIANCE STILL DOES NOT WORK?

Contact an approved service centre (see list in service booklet).

Bekijk gratis de handleiding van Moulinex Perfect Mix Plus LM81GD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.