Moulinex I-Companion XL HF9411 handleiding

Niet gecategoriseerd

Moulinex

90 pagina's

PDF beschikbaar

Handleiding

44 45

PROBLEMS CAUSES SOLUTIONS

“ntc1” is displayed.

+ red indicator light is

ﬂashing.

Temperature sensor 1 is no longer wor-

king.

Contact an approved service centre.

“ntc2” is displayed.

+ red indicator light is

ﬂashing.

Temperature sensor 2 is no longer wor-

king.

Contact an approved service centre.

“ntc3” is displayed.

+ red indicator light is

ﬂashing.

Temperature sensor 3 is no longer wor-

king.

Contact an approved service centre.

Safety indicator display

(C5)

Improper locking of the bowl or lid

Prior to operating the appliance, check

that the bowl is properly locked on the

motor unit and that the lid is properly

locked on the bowl. If the problem per-

sists, contact an authorised centre.

The lid is locked on the bowl in the

“cooking without a lid” mode

Unlock the lid prior to launching the

cooking program. If the problem per-

sists, contact an authorised centre.

The safety lock on the

lid remained active (rod

extended) and prevents

the lid from locking.

The appliance was turned off as a recipe

was in progress by toggling the I/O

switch to the “O” position or was simply

unplugged as a recipe was in progress.

Simply toggle the I/O switch to the “I”

position to reset the food processor,

along with the safety lock on the lid;

the rod will automatically return to its

original position. You may now lock the

lid.

Connection problem See the app guide

LCD screen default

display (temporary

effects)

Like most LCD screens, your appliance’s

display is sensitive to static electricity.

As a result, light spots may appear when

you remove the protective ﬁlm from the

screen or when you rub your screen with

a cloth, for example.

These light spots will disappear after a

few moments. This is a normal occur-

rence and does not affect the functio-

ning or life of your appliance.

• Elimination of packaging and appliance materials.

The packaging exclusively contains materials that are not dangerous to the environment, which can be

disposed of in accordance with the recycling regulations in force.

To dispose of your appliance, ask the appropriate department of your local authority.

• End-of-life electronic or electrical appliances:

Environment protection ﬁrst!

 Your appliance contains valuable materials which can be recovered or recycled.

Leave it at a local civic waste collection point.

RECYCLING

Is your appliance still not working?

Contact an approved service centre (see list in service booklet).

PROBLEMS CAUSES SOLUTIONS

Excessive noise during

operation

The use of a wrong accessory

Please use an adequate accessory (e.g.:

do not use the beater F3 for kneading

or mixing the dough, use the knife F4).

For this, refer to the recommendations

in the recipes and the operating instruc-

tions provided in this manual.

Leak through lid.

Volume of ingredients too high.

Reduce the quantity of ingredients

processed.

The lid is not correctly positioned or locked. Lock the lid correctly on the bowl.

The lid seal is not present.

Position the seal on the seal holder and

clip the assembly to the lid.

The lid seal is cut or damaged.

Change the seal, contact an approved

service centre.

Accessory error.

Check that you are using the

recommended accessory.

Leak from the driver in

the bowl.

The bowl seal (D4) is not correctly po-

sitioned.

Position the seal correctly.

The bowl seal is damaged. Contact an approved service centre.

The locking ring (D5) is not locked

correctly.

Screw the ring in place (D5).

The blades do not rotate

easily.

Pieces of food that are too big or too

hard.

Reduce the size or quantity of the ingre-

dients processed. Add some liquid.

Smell from motor.

On using the appliance for the ﬁrst time, or

in the event of overload of the motor caused

by too large a quantity of ingredients or by

pieces that are too hard or too big.

Allow the motor to cool down (about

30 minutes) and reduce the number of

ingredients in the bowl.

“STOP” is displayed.

The appliance has detected too many

vibrations and has changed to the safety

mode.

Check that you are at the right speed

and that you are using the recommended

accessory.

The control panel does

not work.

The screen is wet or the user has wet

ﬁngers.

Wiping.

“SECU” is displayed.

Motor overload caused by too many

ingredients or pieces which are too hard

or too large or overuse without sufﬁcient

cooling down time.

Allow the motor to cool down (about

30 minutes) and reduce the number of

ingredients in the bowl.

“SECU” is displayed + red

indicator light is ﬂashing.

Overheating of temperature sensors. Contact an approved service centre.

“Err1” is displayed.

+ red indicator light is

ﬂashing.

The heating element is not working.

Check that the power pins under the bowl

are not clogged. If this is the case,

clean them and try again.

If that still does not work, contact an

approved service centre.

“Err2” is displayed. Electronic fault. Contact an approved service centre.

“Err3” is displayed. Speed fault. Contact an approved service centre.

“Err4” is displayed.

Communication fault with chopper elec-

tronic card.

Contact an approved service centre.

Display "Err8" Safety locking sensor fault Contact an Approved Service Centre.

Display "Err9"

Your appliance should no longer be used

in this state as it has a fault that requires

action from your service centre.

Contact an Approved Service Centre.

- *The Bluetooth

brand and logos are registered brands of Bluetooth SIG, Inc. and their use by the SEB Group has been ofﬁcially authorised.

- Google Play and Android are Google Inc. brands.

- Apple and the Apple logo are Apple Inc. brands, registered in the USA and other countries. App Store is an Apple Inc. service mark.

GLOSSARY

Pairing: grouping or associating two devices.

This is carried out when your smartphone or tablet ﬁrst connects with i-Companion xl.

Synchronising: updating of information. The app and i-Companion xl synchronise with each other to exchange information when

they are connected.

Connecting: establishing a link between the app (smartphone/tablet) and the appliance (i-Companion xl). Connecting is vital

for synchronisation.

Cookies: usage information sent to Moulinex to improve the app.

Bekijk gratis de handleiding van Moulinex I-Companion XL HF9411, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.