Motu V4HD handleiding
Handleiding
Je bekijkt pagina 20 van 118
INSTALLING THE V4HD HARDWARE
20
case, all ports (both A and B) share the same
internal FireWire bus. So plan accordingly for your
FireWire resources. In addition, keep in mind that
if you connect a FireWire A device, it can slow the
entire bus to whenever the device is active on the
bus, so any connected FireWire B devices may not
be able to operate at their full performance levels at
all times. (If the FireWire A device is not active,
however, it won’t affect the bus.)
FireWire is for computer connection only
The V4HD does not serve as a FireWire host: it
only operates as a FireWire client to a host
computer. This means that you cannot connect
cameras, hard drives or other client FireWire
devices to the V4HD when it is operating as a
stand-alone converter (with no computer
connected). When the V4HD is operating in stand-
alone mode, the only way to connect a camera to
the V4HD is through the standard video
connectors (analog, SDI, etc.) For more
information about stand-alone operation, see
chapter 11, “Standalone Operation” (page 93).
CONNECT THE V4HD TO YOUR COMPUTER
1 Plug one end of the V4HD FireWire cable into
the FireWire socket on the computer as shown
below in Figure 3-1. If you plan to use Apple’s
ProRes HQ (High Quality) codec with Final Cut
Pro, you must use the FireWire B connection.
2 Plug the other end of the FireWire cable into the
V4HD I/O as shown below in Figure 3-1.
Figure 3-1: Connecting the V4HD to the computer.
☛ Only make ONE FireWire connection to the
computer: either FireWire A or B, but NOT both.
Bekijk gratis de handleiding van Motu V4HD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Motu |
| Model | V4HD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20477 MB |