Motorola BPR40 Portable VHF-аналоговый handleiding

Niet gecategoriseerd

Motorola

2 pagina's

PDF beschikbaar

Handleiding

PRODUCT SAFETY AND RF EXPOSURE COMPLIANCE

ATTENTION!

This radio is restricted to occupational use only to satisfy FCC RF energy exposure

requirements. Before using this product, read the RF energy awareness information and operating

instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola

Publication part number 6881095C98) to ensure compliance with RF energy exposure limits.

For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web

site which lists approved accessories: http://www.motorola.com/governmentandenterprise

Mag One™

by Motorola is registered in the U.S. Patent and Trademark Office.

All other products and service names are the property of their own respective owners.

1301 E. Algonquin Rd.,

Schaumburg, IL 60196-1078, U.S.A.

Before using this product, read the operating instructions for safe usage

contained in the Product Safety and RF Exposure booklet enclosed with your

radio.

*6881098C61*

6881098C61-D

Attaching and Removing the Antenna

To Attach Antenna

To Remove Antenna

1. Fasten the antenna to the radio by placing

the threaded end of the antenna into the

Antenna Connector.

2. Rotate the antenna clockwise until tight.

Turn the antenna in a counter-clockwise

direction until it disengages from the

radio.

Threaded End

of Antenna

Antenna

Connector

Attaching and Removing the Battery

To Attach Battery

To Remove Battery

1. Align and fit the battery tongue into the

groove of the chassis of the radio.

2. Secure the latch at the bottom of the

radio.

1. Unlatch the battery clasp at the bottom of

the radio.

2. Gently lift the hilt of the battery nearest to

the battery latch away from the housing.

3. Slide battery downwards to remove.

Attaching and Removing the Belt Clip

To Attach Belt Clip

To Remove Belt Clip

1. Align mounting rails of the radio with the

grooves of the belt clip.

2. Slide the belt clip downwards until it clicks

into place.

1. Lift the release tab.

2. Slide the belt clip upwards.

Release Tab

Charging your Radio

1. Turn off your radio and the A/C power

supply to your charger (if they are on).

2. Place your radio in the charger pocket.

3. Turn on the charger’s A/C power supply.

4. While charging your radio, the charger’s

LED shows a steady red light. The radio

should be charged at least 16 hours initially

before decreasing charging time to 12

hours.

5. Turn off the charger’s A/C power supply,

and remove the radio from the charger

pocket.

6. For more details, refer to your Tri-Chem

Charger User Guide (6871916T01).

Charger Pocket

Bekijk gratis de handleiding van Motorola BPR40 Portable VHF-аналоговый, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.