Motion CMD-02 handleiding
Handleiding
Je bekijkt pagina 7 van 88
7.1
6.1
6.2
7.2
6
7
English
Shortly press the down button to check if the
blind unrolls the right way. If the blind moves
up, the rotational direction must be changed.
WARNING: risk of damage.
Stop the blind before reaching
the end positions.
Shortly press the program button with a pin on the
motor. The blind will start stepping, indicating that
program mode has been activated.
(The blind keeps stepping until the program mode
is deactivated.)
Repeat steps 6.1 - 6.2 to remove a blind from
a channel.
Press the pair button on the back of the remote
control to pair the blind.
The blind will shortly stop stepping indicating that the
remote has been paired to the blind.
Pair
button
Up
Down
Check rotational direction
Simultaneously press the up and down button
to change the rotational direction.
English
MOTION CMD-02 TUBULAR MOTOR
MOTION CMD-02 TUBULAR MOTOR
Pair a remote
End limits must be programmed to use a blind properly and to prevent it from being damaged.Proceed
to step 12 if end limits are already set.
Bekijk gratis de handleiding van Motion CMD-02, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Motion |
| Model | CMD-02 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6773 MB |
