Moser 1250 handleiding
Handleiding
Je bekijkt pagina 12 van 120

12
ENGLISH
de
en
fr
it
es
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
ar
 f For a good and long-lasting cutting performance, it 
is important to oil the blade set frequently.
 f If the cutting performance deteriorates after long 
use despite regular cleaning and oiling, the blade set 
should be replaced.
Changing the blade set
1.  Switch off the appliance using the on/off switch (Fig.3
ⓑ
).
2.  Press the release button (Fig. 6
ⓐ
) towards the blade set and 
lift the blade set out of the housing (Fig. 6
ⓑ
).
3.  Remove the blade set from the clip (Fig. 6
ⓒ
).
Ensure that the clip is folded out. If this is not the case, 
you can fold out the clip with a flat screwdriver (Fig. 7).
4.  Attach the new blade set onto the clip (Fig. 8
ⓐ
).
5.  Switch the appliance on (Fig. 3
ⓐ
). Then push the blade set 
against the hand-held appliance until it audibly clicks into 
place and the blade moves (Fig. 8
ⓑ
).
Problem solving
Blade set is cutting badly or pulling hair out.
Cause: Blade set is dirty or worn out.
 f Clean and oil the blade set. If this does not resolve the prob-
lem, replace the blade set.
Skin injury
Cause: Too much pressure on the skin.
 f Reduce pressure when cutting close to skin.
Cause: Cutting angle is too steep.
 f Hold appliance flatter to the skin.
Cause: Damaged blade set.
 f Check whether the blade edges were damaged during use and 
replace the blade set if necessary.
Appliance is not working.
Cause: Defective power supply.
 f Make sure that there is a faultless contact between the plug-in 
transformer and the socket. 
 f Check the mains cable for possible damage.
In the event that this information does not help you resolve your 
problem, please contact our service centre. Never attempt to repair 
the appliance yourself!
Disposal
Caution! Environmental damage in the case of incor-
rect disposal.
 f Correct disposal will ensure environmental protec-
tion and prevent any potentially harmful impacts on 
people and the environment.
Adhere to the relevant legal requirements when disposing of the 
appliance.
Information on the disposal of electrical and electronic appli-
ances in the European Union:
Within the European Union, national regulations are 
specified for the disposal of electrical appliances based 
on EU Waste Electrical and Electronic Equipment Direc-
tive 2012/19/EU (WEEE). In accordance with this, the 
appliance can no longer be disposed of with the local 
or domestic waste. The appliance will be accepted free 
of charge by local collection points or recycling centres. 
The packaging for this product is made from recyclable 
materials. Dispose of this in an environmentally friendly 
manner by recycling it.
Accessories
Blade sets
See page 114
Stainless steel attachment combs
See page 115
Bekijk gratis de handleiding van Moser 1250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Moser | 
| Model | 1250 | 
| Categorie | Niet gecategoriseerd | 
| Taal | Nederlands | 
| Grootte | 20442 MB | 
