Handleiding
Je bekijkt pagina 17 van 62
MOUNTING THE MICROWAVE OVEN
1. Make sure all the packing materials are removed from
the inside of the door.
2. Inspect the oven after unpacking for any visual damage
such as:
– Misaligned Door
– Damaged Door
– Dents or Holes in Door Window and Screen
– Dents in Cavity
If any of the above are visible, DO NOT use the oven.
3. This Microwave Oven weighs 18,5 kg and must be
placed on a horizontal surface strong enough to
support this weight.
4. The oven must be placed away from high temperature
and steam.
5. DO NOT place anything on top of the oven.
6. DO NOT remove the turn -table drive shaft.
7. As with any appliance, close supervision is necessary
when used by children.
8. Make sure that the AC outlet is easily accessible so
that the plug can be removed quickly in an emergency.
Otherwise, it should be possible to disconnect the
device using a switch from the circuit. In this case, the
existing provisions of the electrical safety standards are
considered.
The product has to be correctly installed on earthed
socket with a single-phase AC (230 V~50 Hz).
WARNING! THIS APPLIANCE MUST BE EARTHED!
9. This oven requires 1.45 kW for its input consultation
with service engineer is suggested when installing the
oven.
CAUTION: This oven is protected internally by a 250V,
10 Amp Fuse.
INSTALLATION
19
Bekijk gratis de handleiding van Mora VMT 445 X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mora |
| Model | VMT 445 X |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 4101 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Ingebouwd |
| Inhoud (binnenkant) | 25 l |
| Soort bediening | Buttons, Rotary |
| Magnetronvermogen | 900 W |
| Vermogen grill | 1000 W |
