Mooer Ocean Machine II handleiding
Handleiding
Je bekijkt pagina 6 van 29
3
counterclockwise (11-7 o'clock) high pass filter (20 kHz ~ 3 kHz)
5. RevMix: Rotate to adjust the dry/wet ratio of the reverb effect.
6. FeedbackA: Rotate to adjust the feedback value of the DelayA module (repeats).
7. TimeA: Rotate to adjust the delay time of the DelayA module.
8. SweepA: Default adjustment of the bandpass sweep for the DelayA delay effect. Turned all the
way left, the bandpass filter is turned off. Rotate the control to the right to open up the bandpass
sweep with a center frequency range of 80 Hz - 10 kHz and a Q value range of 0.3 - 5. Press and
hold the Setting knob while you rotate the Sweep control to adjust the Q value.
9. DlyMixA: Rotate to adjust the dry/wet ratio of the DelayA module.
10. FeedbackB: Rotate to adjust the feedback value of the DelayB module (repeats).
11. TimeB: Rotate to adjust the delay time of the DelayB module.
12. SweepB: Default adjustment of the bandpass sweep for the DelayB delay effect. Turned all the
way left, the bandpass filter is turned off. Rotate the control to the right to open up the bandpass
sweep with a center frequency range of 80 Hz - 10 kHz and a Q value range of 0.3 - 5. Press and
hold the Setting knob while you rotate the Sweep control to adjust the Q value.
13. DlyMixB: Rotate to adjust the dry/wet ratio of the DelayB module.
14. Menu: Rotate/press the knob to select the parameters. (See section
15. Menu
control)
During standard operation, rotate the Menu knob to adjust the Master Mix.
Press to access the screen menu. Rotate to navigate, press to enter.
16. Reverb: Rotate to select a reverb type. (See section EFFECT TYPES
)
17. DelayA: Rotate to select the delay type of DelayA. (See section EFFECT TYPES
)
18. DelayB: Rotate to select the delay type of DelayB. (See section EFFECT TYPES
)
19. Home: Press to return to the main interface screen.
20. Setting: Press to enter the Settings menu.
21. Store: Press to store the current preset setting.
22. Looper: Press to open the Looper Menu.
Footswitches:
23. REV footswitch:
Play mode: press to turn the Reverb on/off, hold for frozen feedback effect
Patch mode: activates all effects used in the selected preset / bypass for all effects (global bypass)
Looper mode: controls the REC/PLAY/STOP/CLEAR functions of the Looper
24. A footswitch:
Play mode: press the footswitch to turn DelayA on/off, hold for frozen feedback effect
Patch mode: scroll down between presets
Looper mode: 1/2 speed mode on/off
25. B footswitch:
Play mode: press the footswitch to turn DelayB on/off, hold for frozen feedback effect
Patch mode: scroll up between presets
Looper mode: Reverse mode on/off
REV + A footswitches simultaneously:
Play mode: opens Tap tempo mode. Then use the REV footswitch for Master Tap Tempo or the
A / B footswitches for their respective tap tempos. (See section Tap Tempo
)
Patch mode: switch between Patch Detail screen and Preset Selection screen
A + B footswitches simultaneously:
Switch between Play Mode and Patch Mode. (See sections Play Mode
and Patch Mode).
Bekijk gratis de handleiding van Mooer Ocean Machine II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mooer |
| Model | Ocean Machine II |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6628 MB |
