Mooer Ocean Machine II handleiding

29 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 13 van 29
10
Freeze Feedback
Holding down any of the footswitches while its respective effect is turned on will put the effect into a
state of infinite feedback until the footswitch is released. This can result in oscillating feedback in
some cases. The feedback will decay again as soon as the footswitch is released.
Note: If you want to use Freeze Feedback in Patch Mode, press the REV and A footswitches
simultaneously to switch to Patch Detail screen. Then use the footswitches as described above.
Tap Tempo
Simultaneously press the REV and A footswitches to access tap tempo control. The green LED ring for
the REV footswitch will blink to indicate that the Tap Tempo Mode is active. The blinking rate
indicates the speed of the MASTER TAP TEMPO. The Screen will show the BMP value of the Master
Tap Tempo.
You will then have a few seconds to enter your desired tempo by tapping a footswitch at least two
times.
Values for automatic tempo subdivision can be set for each delay separately by accessing the
TempoA and TempoB fields in the main screen. (See section Tempo subdivisions
.)
REV footswitch = Master Tap Tempo:
Tapping the REV footswitch sets the Master Tap Tempo for
DelayA and DelayB simultaneously.
The subdivision settings for DelayA (TempoA) and DelayB
(TempoB) will then be applied to the Master Tap Tempo.
The Master Tap Tempo has no effect on DelayA or DelayB if
the subdivision settings are set to OFF.
While setting the Master Tap Tempo, the display screen shows the BPM value for the Master Tap
Tempo and the blinking rate of the Reverb LED ring also indicates the tempo.
You can set the value by rotating the Menu knob or by tapping the REV footswitch several times.
A footswitch = Sets an individual tap tempo for DelayA.

Bekijk gratis de handleiding van Mooer Ocean Machine II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkMooer
ModelOcean Machine II
CategorieNiet gecategoriseerd
TaalNederlands
Grootte6628 MB