Mooer GL100 handleiding
Handleiding
Je bekijkt pagina 20 van 35
17
4. Position jumping during performance
The GL100 supports switching between different storage positions during performance.
You can use the footswitches to jump between storage positions while the Looper is running
(Playback or Overdub).
The running status after the jump (Playback or Stop) depends on whether there is data at the jump
target.
This feature allows you to pre-record or import passages of a song into different locations and call
them up as you play, or to create different passages of a song live and in real time from scratch.
Each memory location can be used to record different drum rhythms or tempos. This feature
eliminates the need to stop for saving and is designed for stage performance.
Press both footswitches at the same time while the Looper is running (playing or overdubbing).
This activates the position switching mode (display blinking).
Select the target position by stepping on the left (down) or right (up) footswitch.
The target position is activated 3 seconds after stopping the switching operation.
When the audio playback of the original position finishes, it will jump to the new position to play
back the loop stored there or to start a recording, if the storage position is empty.
Starting position Target position
Bekijk gratis de handleiding van Mooer GL100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mooer |
| Model | GL100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7756 MB |
