Monogram ZEM200WV handleiding

Handleiding

12345678910111213141516/ 16

Afdrukken

Je bekijkt pagina 11 van 16

11

Assemble

trim kit

frame

Install

trim kit

frame

• Assemble top, bottom

and side trims with four

screws D, as illustrated.

When assembled, top,

bottom and side strips

must be flush.

Note:

Bottom trim has a hinge

notch and is not interchangable

with top trim.

Caution:

Do not overtighten

screws; doing so could cause

misalignment of top and side

strips.

• Use the assembled frame as a template. Insert the

frame into the cut-out and locate the attaching

holes.

• Temporarily hold the frame in place by starting the

four screws that attach the frame to the base pan

and side covers.

• Push frame as far left as possible, drive the four

screws.

• Check to be sure door clears the trim when open.

Installation

Microwave Oven

• Mark the four holes on the side of the trim.

• Remove the frame.

• Center punch and drill 3/32" pilot holes.

• Position the assembled frame around the oven and

secure with 8 screws C, using the smaller Phillips

head screwdriver to prevent burring the Phillips

head.

Screw D

Screw C

12345678910111213141516/ 16

Bekijk gratis de handleiding van Monogram ZEM200WV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Monogram (Magnetron)

Handleiding bekijken

Monogram ZEM200WY

Magnetron - handleiding

Andere merken in Magnetron