Monitor Audio Bronze 300 7G handleiding
Handleiding
Je bekijkt pagina 6 van 13
8 9
Setting up your system
2 channel system
When arranging a 2 channel system, the listening position and the loudspeakers should form an
equilateral triangle. Ideally the loudspeakers should be positioned approximately 6 - 10 feet (1.8
- 3m) apart and a minimum of 3 feet (91cm) from the side walls. The ideal distance from the rear
wall varies depending on the loudspeaker (see list below).
Note: These are recommended distances for optimal performance.
Actual results will vary dependant on room size, construction and personal tastes.
Experimentation is strongly advised when setting up the loudspeakers, as environment and
personal preference will dier with every installation.
If there is insuicient bass for example, try moving your loudspeakers closer to the rear wall.
The opposite approach is recommended if there is excessive bass. Additionally refer to the
information relating to port bungs on page 15.
If stereo imaging is being lost, try ‘toeing’ them in slightly. Sounds that are recorded equally to
each channel should sound as though they come from between the speakers. The angle should
be adjusted to personal tastes, the speakers are designed to be pointed to a point behind the
listener. For a more airy sound point the speakers directly towards the listening position or to
reduce this point them direct forward.
Bronze 50 7G
15 - 30 cm / 6 - 12 ”
Bronze 300 7G
20 - 36 cm / 8 - 14 ”
x mx m
x m
Bekijk gratis de handleiding van Monitor Audio Bronze 300 7G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Monitor Audio |
| Model | Bronze 300 7G |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 970 MB |
