Monitor Audio Airstream S200 handleiding
Handleiding
Je bekijkt pagina 5 van 22
1. Standby. Either puts the S200 into standby or wakes it
from standby. When woken from standby it will start in the
previously selected input.
2. Informative LED. Will illuminate dierent colours and ash
in varius sequences to identify the current state of the S200
(refer to page 16 for the key and explanations behind each
of these).
3. Volume up. Increases the volume level of playback.
4. Volume down. Decreases the volume level of playback.
5. Wi-Fi input. Switches between Airplay/ DLNA and Airstream
Direct modes. A long press will enter Airstream Connect
mode.
6. Input toggle. Scrolls through the available inputs in the
order of Airplay/ DLNA Source > Bluetooth > Aux.
The S200
7
8 9 10 11
1 2
3
4
5
6
7. Wi-Fi Sharing/ Factory Reset button. This button also
serves two purposes: A short press is required when
connecting the S200 to a wireless network via the USB
method. Press and hold for 12 seconds to perform a factory
reset.
8. Mains power input. Connect the supplied mains lead here.
9. Auxiliary input. This is used to connect an additional device
via a 3.5mm stereo jack lead (not supplied).
10. USB input. Connect an iPod, iPhone, iPad via the Apple USB
cable (not supplied) for music playback of devices that are
not AirPlay enabled. Also used for connecting the S200 to
a wireless network, refer to page 5. Devices can also be
charged via the USB, but the S200 needs to be out of standby
mode.
11. ABR. Auxiallary Bass Radiator.
3
Bekijk gratis de handleiding van Monitor Audio Airstream S200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Monitor Audio |
| Model | Airstream S200 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 6887 MB |
