Monitor Audio Airstream S200 handleiding
Handleiding
Je bekijkt pagina 11 van 22
9
8. Click on Wi-Fi Setup on the left hand side of the page. On this
page, you will see the details of the S200 and the “Prole” of
the wireless network you are about to connect to.
9. Click the drop down arrow to select the “Service Set ID”
(SSID). In the list should be your wireless network. Select
your network and enter the WEP Key (or other security type).
10. Click Apply. When you do, a warning pop up will be displayed,
click OK.
Windows pop up:
Mac pop up:
11. After clicking the OK button on the pop up, there will be no
other visible indication on your browser that the S200 is
connected to the network.
The LED on the S200 will ash blue while it is establishing a
connection to the wireless network and then change to the
previous input mode once it has been connected. This will
be indicated by the LED.
To select AirPlay, press the input toggle button (item 6 on
page 3) until the LED is blue.
12. Remember to return to the Available Wireless Networks list
on your computer and reselect your home Wireless Network.
13. To start streaming to the S200 from your PC, Mac or iOS
device, please refer to page 10.
Wall Mounting
The Airstream S200 can be wall mounted using the integrated 1/4
inch UNC threaded insert. Circled below.
The Monitor Audio Speaker Mount will also work with the S200.
If it still ashes red slowly after repeating the above
steps, try moving the S200 closer to the router.
If the LED ashes red slowly (pattern #1), then it has
failed to connect. You will have to repeat the above
steps to try again.
HINTS
Bekijk gratis de handleiding van Monitor Audio Airstream S200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Monitor Audio |
| Model | Airstream S200 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 6887 MB |
