Mobotix M73 handleiding
Handleiding
Je bekijkt pagina 34 van 87
Mounting
Installing an additional Sensor Module
NOTE! Upon delivery, the socket for an additional sensor module is closed with a blind modules 1.5. This
closes off the front plate and protects the camera against foreign objects, animals and water.
WARNING! Make sure the power supply to the camera is disconnected before installing or replacing sensor
modules.
WARNING! When installing the sensor modules or closing the module housing, make sure that the sensor
module cables are not damaged or bent sharply.
CAUTION! Do not operate the camera until all three module receptacles have been fitted with sensor mod-
ules or blind modules.
1. Prepare the sensor module: Remove the bayonet catch by rotating it counter-clockwise, then remove
the blue rubber plug.
NOTE!
If the plastic nut has been installed, remove it.
This nut will not be used any more in the mounting process.
34 / 87
Bekijk gratis de handleiding van Mobotix M73, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mobotix |
| Model | M73 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 22000 MB |
