MKC MKDP-60 handleiding
Handleiding
Je bekijkt pagina 13 van 16
Position
The speakers positioning is essential for the correct reconstruction of the acoustic
image, both in stereo systems and in the case of a cinema effect; refer to the
previous safety indications also with regard to this topic.
The ideal height is that of the listener's ear, therefore, in standard situations, with
listening from sofas or armchairs, it is between 1.20 and 1.50 m. The speakers must
be oriented in front of the listener slightly converging, at a mutual distance approxi-
mately double that of the listener: a distance of at least 50 cm in all directions from
the surrounding walls is appropriate. In any case, improper positioning does not
compromise the operation or safety of the speakers, but compromises, in some
cases significantly, their performance.
Electrical connections
After installation, in compliance with the safety criteria listed above, proceed to
connect the signal from the amplifier.
1. Check that the amplifier is turned off.
2. Verify that the amplifier's impedance and output power are correct for the spea-
kers.
3. Use specific cable for 14AWG Ø 1.62mm bipolar speakers for connecting the
amplifier signal outputs to the speaker terminals.
4. Do not exceed the length of 10m each for the wiring; longer wiring will result in a
significant drop in performance of both the speakers and the amplifier.
5. Respect the polarity of the amplifier
terminals with that of the speakers as
shown in the diagram opposite (gene-
rally red with red and black with black).
Installation with the wrong polarity will
result in a significant drop in perfor-
mance.
AMPLIFICATORE
diffusore
diffusore
6. Strip each of the two poles of the signal
cable coming from the amplifier for a length
of 1 - 1.5 cm, then press the lever under the
cylindrical terminals until the circular hole is
completely uncovered, then pass the strip-
ped part through the hole and release the
lever, subsequently checking the correct
retention of the cable.
7. Once the connections are completed, check that the cables have been comple-
tely inserted and that there are no metal parts of the respective conductors that
put the two terminals in contact: this circumstance will result in a strong compromi-
se in performance and a high risk of damaging the amplifier. (Short circuit).
Bekijk gratis de handleiding van MKC MKDP-60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MKC |
| Model | MKDP-60 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1554 MB |
