MKC MKDP-60 handleiding
Handleiding
Je bekijkt pagina 11 van 16
Pair of 6 Ohm 60W (30W RMS) Hi-fi speakers from the MKC Deep Sound profes-
sional line. Hi-fi high quality both in the home and for commercial uses such as:
classrooms, shops, restaurants, conferences and wherever a clear and qualitative
sound reproduction is required.
The components choice and the constructive study together with the finely tuned
crossover return the singing voice with clear and crystalline trebles and a natural
and highly resonant bass.
The 0.75” – 19 mm silk dome tweeter guarantees clear treble up to 20KHz and the
6" - 152 mm polypropylene woofer cone with phase reducer, ensures the quality of
reproduction of the mid-low frequencies with great spatial effect.
The cabinet design is simple and refined, adaptable to any context, both residential
and professional, without sacrificing the power and definition of the sound.
Important requirements for the product safe use
• Before proceeding with the installation of the speakers, read this manual comple-
tely and carefully follow the instructions; also keep it in case of future needs.
• The speakers installation must be carried out by specialized and competent tech-
nical personnel; incorrect installation can result in a drop in performance, in possi-
ble damage to the speakers themselves and the devices connected to them, up to
the risk for the safety of the surrounding people.
• The speakers installation must take place on a flat and stable surface, capable of
withstanding a weight at least three times greater.
• If necessary, secure the speakers to the surface with suitable devices, such as
double-sided adhesive strips, cords or chains.
• If the product is to be installed suspended, through the use of special supports
sold separately, check the correct installation of the support as well, as well as the
use of all safety devices necessary to prevent injury to third parties in the event of
an accidental fall.
• The input signal cable cannot itself be considered a safety device in case of
accidental fall, since the connector does not ensure sufficient restraint.
• The wiring must be connected in a stable manner and it must be ensured that the
individual cables cannot be accidentally disconnected.
• Check that the wiring does not constitute an obstacle or danger for people and / or
animals in the surrounding environment: they must therefore be secured along the
corners of floors and walls, they must not cross floors and must not be passed
under carpets and mats, where they can cause swelling that are difficult to see
and therefore dangerous.
• Avoid any installation that exposes the diffusers to direct sunlight, even through
glass, or along the thermal flows of radiators, radiators, stoves and / or fans.
• Carefully check that the output power and impedance data of the amplifier are
consistent with the technical data below: in the event of large differences, the
product may suffer irreversible damage and the safety requirement may be com-
promised.
• Periodically check the integrity of the speakers: in case of smoke emission, bad
smell, unusual noises or in case of deformation, overheating, structural damage or
opening of holes previously not present, immediately suspend use and consult
specialized technical personnel.
• Do not turn up the volume too much during use, especially if for a prolonged period
of time: exposure to strong acoustic pressures can result in damage, sometimes
permanent, to the hearing system. Therefore, avoid placing the speakers too
close to the user.
• Do not disassemble the speakers for any reason: any investigations or repairs in
the event of a malfunction must be carried out by specialized technical personnel.
• Keep away from children, animals and / or people with reduced physical, cognitive
or motor capacity: in case of use by the latter, adequate supervision must be
guaranteed.
• Do not expose the speakers to water or other liquids; therefore avoid installations
near tanks, pipes, taps, downspouts, full containers, swimming pools, aquariums,
valves, air conditioning units, etc.
• Avoid use in environments that are too humid, dusty, saturated with water vapor,
gases, vapors of various kinds or inside environments containing flammable and /
or explosive material.
• Avoid in any way any type of contact with the moving surfaces of the loudspeakers
(cone and domes): any deformation of them will lead to significant worsening of
performance.
Technical features
Speaker structure and size
• System: 2 speakers 2-way
• Cabinet structure: MDF veneered with wood print
• Color finish: black or cherry
• Speakers: 0.75" Tweeter and 6" Woofer
• Deflector dimensions: L. 12 mm x H. 9 mm x D. 9 mm
• Dimensions: H. 310 × L. 195 × D. 183 mm
• Net Weight: 5.6 Kg (pair)
• Gross weight: 6.1 Kg (pair)
Tweeter
• Driver diameter: 0.75” – 19 mm
• Coil diameter: 0.8” – 19.4 mm
• Magnet diameter: 2.2” – 55 mm
• Magnet weight: 94g / 3.3oz
Woofer
• Driver diameter: 6” – 127 mm
• Coil diameter: 1” – 25.4 mm
• Magnet diameter: 2.76” – 70 mm
• Magnet weight: 223g / 7.9oz
Parameters
• Impedance: 6 Ohms
• Musical power: 60 Watts
• Nominal power: 30 Watts
• Input power capacity: 10~60 Watts
• Sensitivity: 87dB±2dB
• Frequency response: 65Hz~20KHz
• Crossover frequency: 5000 Hz
Bekijk gratis de handleiding van MKC MKDP-60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MKC |
| Model | MKDP-60 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1554 MB |
