MKC MK-683 handleiding
Handleiding
Je bekijkt pagina 55 van 68
lected, for which the time band settings are the
same for all days of the week, programming
ends here
8. If the MON-FRI + SAT-SUN or MON-SAT +
SUN program has been selected, programming
restarts from point 4 for the other days of the
week, as shown in the upper part of the display
If, in case of difculty, you want to start programming
all over again, you can proceed with the reset, which
restores the factory standard times and temperatu-
res: the reset is described in the previous chapter
5.3, “System settings” on line b2.
5.6 - Power on and off
Using the button
you can turn the control unit on
or off. It should be noted that, in the off position, it
does not give the power unit any command establi-
shed by the programming; in this condition, the boiler
is not operational for heating, remaining active only
for the possible administration of domestic water.
The button
then switches on and off, as well as
the control unit, also of the boiler heating function,
except for the antifreeze protection, which always
remains active according to the programming of the
preliminary function A04 described above, provided
that during this operation the value “- -“ has not been
Bekijk gratis de handleiding van MKC MK-683, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MKC |
| Model | MK-683 |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 4293 MB |
