Mitsubishi MSY-GS15NA handleiding

Airco

Mitsubishi

8 pagina's

PDF beschikbaar

Handleiding

1-4. INSTALLATION DIAGRAM

ACCESSORIES

Check the following parts before installation.

(1) Installation plate 1

(2)

Attachment screws for the installa-

tion plate

4 × 25 mm

(3) Wireless remote controller 1

(4) Felt tape (For left or left-rear piping) 1

(5) Remote controller holder 1

(6)

Screws for the remote controller

holder

3.5 × 16 mm (Black)

(7) Battery (AAA) for (3) 2

(8) $LUFOHDQLQJ¿OWHU 2

FIELD-SUPPLIED PARTS

(A)

Indoor/outdoor unit connecting wire*1

(B) Extension pipe 1

(D) Wall hole cover 1

(E) Pipe attachment strap 2 to 5

(F) Screw for (E) 4 × 20 mm 2 to 5

(G) Piping tape 1

(H) Putty 1

(I)

Drain hose

(or soft PVC hose, 19/32 in. [15 mm]

inner diameter or hard PVC pipe

VP16)

2 to 5

(J) Refrigerant oil 1

(K) Power supply cord *11

Units should be installed by licensed contractor

according to local code requirements.

Indoor unit

Wall hole

sleeve (C)

Cut off the

extra length.

Pipe attachment

strap (E)

Use the wall hole sleeve

outdoor connecting wire

(A) from contacting metal

parts in the wall and to

protect the wiring from

rodents.

Wall hole cover (D)

Seal the wall hole

gap with putty (H).

Attach the pipe to

wall with pipe at-

tachment strap (E).

Attachment screw (F)

After the leak test, apply insulating mate-

rial tightly so that there is no gap.

When the piping is to be attached to a wall

comprised of tin plate or metal netting, use

chemically treated wooden piece 25/32 in.

(20 mm) or thicker between the wall and

the piping, or wrap insulation vinyl tape 7 to

8 turns around the piping.

To use existing piping, perform COOL

operation for 30 minutes and pump down

before removing the old air conditioner.

5HPDNHÀDUHDFFRUGLQJWRWKHGLPHQVLRQ

for new refrigerant.

Note:

*1 Place indoor/outdoor unit connecting wire (A)

and power supply cord (K) at least 3 ft. (1 m)

away from the TV antenna wire.

4-3/8 in.

(110 mm) or

3-7/8 in.

(100 mm)

or more

2-1/8 in. (54

mm) or more/

5-1/8 in. (130 mm)

or more for left/left

rear piping (using

spacer)

3/8 in. (10 mm)

or more

Drain piping for outdoor unit

Install the unit horizontally.

Do not use drain socket in cold regions. Drain may freeze and make the fan stop.

The outdoor unit produces condensate during the heating operation. Select the installation place to ensure to prevent the outdoor unit and/or the grounds from being wet by drain

water or damaged by frozen drain water.

Unit: inch Unit: mm

31-1/2

19-11/16

Air inlet

Air outlet

13-9/16

11-1/4

2-3/8

13/16 slot

12-12-3/4

1-9/16

800

500

Air inlet

Air outlet

2-10

21 slot

344.5

285

150

304-325

5-15/16

5.9 ft. to 7.5 ft. (1.8 m

WRPIURPWKHÀRRU

is recommended

4 in. (100 mm)

or more

14 in. (350 mm)

or more

4 in. (100 mm)

or more

clear *2

*2 4 in. (100 mm) or more when front

and sides of unit are clear

*3 When any 2 sides of left, right and

rear of unit are clear

8 in. (200 mm) *3

or more

Air inlet

Note:

• The dimensions indicated in the arrows (

) above

show the required space to guarantee performance of

the air conditioner. Install the outdoor unit where the

maximum possible space can be provided, considering

later relocation, services, or repairs.

 7KHFRROLQJKHDWLQJSHUIRUPDQFHDQGWKHHI¿FLHQF\RI

power usage may fall about 10% at the place where short

cycle is likely occur due to poor ventilation. Installing the

air outlet guide (optional) can improve performances.

• If air from the outlet blows against the wall, it may cause

stains on the wall.

Do not take in the outlet air

discharged by other units directly.

15-3/4 in. or more

(400 mm or more)

39-3/8 in. or more

(1000 mm or more)

Bekijk gratis de handleiding van Mitsubishi MSY-GS15NA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.