Mitchell & Brown JB-32W1811 handleiding
Handleiding
Je bekijkt pagina 19 van 43
English - 18 -
Network Menu Content
Network Type
Disable the network connection or change the connection type.
Scan Wireless
Networks
Start a search for wireless networks. This option will be available if the Network Type
is set as Wireless Device.
Disconnect
(automatically saved when you connect to a wireless network), highlight this option and
press OK. This option will not be available if you did not connect to a wireless network.
Press WPS on your
If your modem/router device has WPS, you can directly connect to it using this option.
Highlight this option and press OK. Go to your modem/router device and press the
WPS button on it to make the connection. This option will be available if the Network
Type is set as Wireless Device.
Internet Speed Test
Start a speed test to check your connection bandwidth. The result will be displayed on
OK to return to the Network menu.
Advanced Settings
OK to see available options.
Highlight Save and press OK to save the changes when you are done.
Networked Standby
Mode
Enable or disable this feature by setting it as On or .
Note: For detailed information on the options of this menu refer to the Connectivity section.
Installation Menu Content
Automatic Channel
Scan (Retune)
Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations.
Internet (IP) Channels only:
Scan Internet (IP) Channels Internet (IP)
.
Manual Channel
Scan
This feature can be used for direct broadcast entry.
Network Channel
Scan
Searches for the linked channels in the broadcast system. D. Aerial: Searches for
aerial network channels.
Installation Settings
(optional)
Displays installation settings menu. Standby Mode Search (*): Your TV will search for
new or missing channels while in standby. Any new found broadcasts will be shown.
Channel Management (*): If this option is set as Enabled, the changes on the broadcasts
such as frequency, channel name, subtitle language, etc. will be applied automatically
while watching.
(*) Availability depends on model.
Clear Service List
Use this setting to clear channels stored.
Select Active
Network
This setting allows you to select only the broadcasts within the selected network to be
listed in the channel list. This feature is available only for the country option of Norway.
Signal Information
You can use this menu item to monitor signal related information such as signal level/
quality, network name, etc. for available frequencies.
Internet (IP)
Channels Settings
Scan Internet (IP) Channels: You can enable
On or .
Factory Reset
Deletes all stored channels and settings, resets TV to factory settings.
Bekijk gratis de handleiding van Mitchell & Brown JB-32W1811, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mitchell & Brown |
| Model | JB-32W1811 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 5529 MB |
