Mission Air Nest handleiding
Handleiding
Je bekijkt pagina 9 van 30
Power: Press to turn on / off the thermostat.
Cooling / Heating mode: This thermostat supports either the cooling or heating mode that
can be selected and switched in the APP or refer to the "Advanced Option Settings".
Operating Modes: Press in the APP or on the thermostat's control panel to switch
between the operating modes. Depending on the mode, an icon will appear at the top of the
screen.
Manual mode : In this mode, the thermostat controls the device according to the
manually set temperature.
Programming Mode : In this mode, the screen displays the current programming
cycle in which there is a thermostat and the thermostat controls the device according to
the weekly programming schedule. Please refer to item 7 for scheduling.
Temporary manual mode : In programming mode, manually adjust the temperature
and enter temporary manual mode. During this time, the icon will flash on the screen
and the thermostat will execute the currently set temperature during this time and the
temperature will be restored during the next weekly programming cycle.
Vacation mode : In this mode, the thermostat will keep the temperature constant
until the end of the vacation. Last days of holiday mode can be set in APP or long press
----to enter clock setting and then press 4 times to enter holiday mode day setting,
test screen "RT" will start flashing.
Temperature Setting: Press to set the target temperature.
Time setting: Wifi version will automatically sync the time when connected to the network.
Or long press to enter the time setting and press to adjust the value, set the
minutes, hours and days of the week accordingly ("
①
" at the top of the screen is Monday,
"
②
" is Tuesday, and so on). After you finish adjusting, press to exit time settings.
Parental lock: press and hold simultaneously for 5 seconds, the thermostat will
enter into parental lock mode. You can also set a full lock and a half lock in the advanced
options, see the description of the advanced options below.
5 + 1 + 1 programming mode setting: the wifi version can be set in APP. In no wifi version,
long press to enter clock setting, then press 4 times to enter programming mode
setting. At this point, the display shows (
①②③④⑤
), the minute of time flashes and the cycle
is 1 . Then press to select and set the hour, temperature and cycle. Press to
adjust the corresponding value. After completing the settings, turn off once to save the data
to the thermostat.
Outdoor sensor data: long press for 5 seconds, the screen will display the sensor data
temperature. If no external sensor is connected, the message "err" will be displayed
1.
2.
3.
a.
b.
c.
d.
4.
5.
6.
7.
8.
OPERATING THE DEVICE
missionair
B I U R O @ M I S S I O N A I R . P L S E R W I S @ M I S S I O N A I R . P L W W W . M I S S I O N A I R . P L
T E L . ( + 4 8 ) 7 9 7 4 5 1 1 1 1
EN
Bekijk gratis de handleiding van Mission Air Nest, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mission Air |
| Model | Nest |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4163 MB |
