Mirpol Bise handleiding

11 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 9 van 11
9BISE COLUMN PL / EN
Transport and storage
Tip
Incorrect storage or transport of the device may damage it.
Observe the information on transport and storage of the
device.
Transport
Each time before transport, consider the following tips:
Turn off the device.
Disconnect the device by pulling the power plug.
Do not use the power cord to pull the device.
Wait for the device to cool down.
Storage
Before each storage, follow the instructions below:
Disconnect the device by pulling the power plug.
Wait for the device to cool down.
When the device is not being used, observe the following
recommendations regarding storage conditions:
protect it from moisture, frost and heat,
store the device in an upright position in place free from
dust or direct sunlight,
if necessary, protect the device from dust using
appropriate packaging,
do not place other devices or on top of the device items
in order to avoid its damage,
Installation and commissioning
Unpacking the device
1. Open the carton and take out the device.
2. Completely remove the device and parts from its
packaging.
3. Completely unwind the power cord. Note, that the cord
is not damaged and avoid damaging it while unwinding
it.
Assembly
1. Loosen and remove the plastic xing nut from the main
unit. (Fig 1).
2. Slot the two base plates together. (Fig 2).
3. Gently thread the power cable from the main unit
through the hole in middle of the base (Fig 3).
4. Gently slot the main unit through the centre of the base
and secure with the plastic xing nut. (Fig 4)
5. Tidy the power cable into the slots. (Fig 5).
Uruchomienie urządzenia
Before starting the device, check the condition of
the power cord. In case of any doubts regarding its
condition, we recommend contacting the service.
Place the device in an upright position on a stable at
surface.
Make sure that the device does not come into contact
with moisture or water.
1
2
3
4
5

Bekijk gratis de handleiding van Mirpol Bise, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkMirpol
ModelBise
CategorieVentilator
TaalNederlands
Grootte2241 MB