MIPRO ACT-800H handleiding
Handleiding
Je bekijkt pagina 10 van 20
Handheld Wireless Microphone
9
All rights reserved. Do not copy or forward without prior approvals of MIPRO.
Specifications and design subject to change without notice. YM 023/02
(B) AF GAIN:
(2) The higher the gains, the lower the dynamic
range for signal input and the greater the
danger of unwanted noises and higher
chances of feedback.
(1) AF Gain can be changed from 0dB to 6dB in
3dB step.
(1) Select L-CUT or FLAT.
(C) AF L-CUT:
(2) L-CUT: the frequency response at 100Hz will
decrease about 3dB with a slope of
-6dB/Octave.
L - CUT
AF L-CUT
FLAT
AF L-CUT
(1) Select YES or NO.
(2) YES: the maximum output of the receiver is
limited to 1V.
(D) AF LIMIT:
AF LIMIT
YES
AF LIMIT
NO
(E) ENCRYPTION: Display Encryption Information
The ENCRYPTION function must be set at the
receiver first then using ACT to program the
transmitter. (Refer to ENCRYPTION function of
the receiver)
ENCRYPT
NO
0 dB
AF GAIN
3 dB
AF GAIN
6 dB
AF GAIN
(F) Select HIGH or LOW. RF POWER:
RF POWER
HIG H
RF POWER
LOW
Bekijk gratis de handleiding van MIPRO ACT-800H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MIPRO |
| Model | ACT-800H |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1404 MB |
