Miogo MTB1 handleiding

Handleiding

12345678910111213141516171819202122232425262728293031323334353637383940414243444546/ 46

Afdrukken

Je bekijkt pagina 18 van 46

18

Cleaning and maintenance

WARNING!

• Before cleaning your blender, make sure that the "ON/OFF" knob is in the "OFF"

position and that the appliance is unplugged from the power point.

• Never immerse the motor unit, power cord or plug in water or any other liquid.

• There is a potential risk of injury if used improperly.

• The blades are sharp. It is essential that you take special precautions when handling

them to avoid injury.

• Never use scouring pads or abrasive detergents for cleaning.

GENERAL CLEANING RECOMMENDATIONS

• Immediately rinse all the parts after use for easy cleaning.

• The removable parts (lid, measuring cap, blender jar, blade block) can be hand washed

with water and washing-up liquid or placed in the dishwasher.

• Be sure to clean the seal of the lid and the seal of the blade block thoroughly. When

they are clean and dry, put them back correctly on the appliance.

JAR AND BLADE SELF-CLEANING FUNCTION

Your appliance has a self-cleaning program that simplies the process of cleaning the

blades and jar.

1. After using your appliance and nishing a recipe, place the blender jar on the motor

unit.

2. Pour 400 to 500 ml of warm water with a little non-abrasive cleaning product (e.g.

washing-up liquid).

3. Set the control knob to the ON position and press the "CLEANING" button. The

corresponding indicator light comes on and the appliance starts up. The cleaning

cycle operates automatically.

4. Once the cleaning is nished, the appliance stops automatically and the 3 indicator

lights start to ash.

5. Unplug the appliance, remove the mixing bowl from the motor unit and rinse it with

clear water.

6. Turn the mixing bowl over and unscrew the blade unit (turn from position to

position ).

7. You can now clean the blade assembly and bowl contours.

8. Dry the parts thoroughly with a soft cloth.

9. Screw the blade unit back on, making sure you tighten it to avoid leaks the next

time you use it.

12345678910111213141516171819202122232425262728293031323334353637383940414243444546/ 46

Bekijk gratis de handleiding van Miogo MTB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Blender