Minolta RD-175 handleiding
Handleiding
Je bekijkt pagina 13 van 34
RD-175 Digital Camera
13
4. Preparing the PC
c Install MS-DOS, Windows and the TWAIN-compliant image-editing software
(e.g. Adobe Photoshop, Corel Photopaint etc.) on your computer.
d Install an ASPI-compatible SCSI board. We recommend
Adaptec SCSI controllers of Series 1520/1522 or 1540/1542.
ISA-bus computers do not support more than 16 MB RAM.
Should you be using an Adaptec ISA controller of Series
1540/1542 with the RD-175 Digital Camera, please ensure that
the amount of RAM installed is not greater than 16 MB since
your system would otherwise not work correctly.
Please make the following settings for the SCSI host adapter, depending on
the SCSI ID which you have selected for connecting the camera, before you
connect the RD-175 Digital Camera to your computer:
“Initial Sync Negotiation” - OFF
“Enable Disconnection” - OFF
Please consult the Manual for the SCSI controller if necessary in order to
make these settings.
e Check that your Windows directory contains file “TWAIN.DLL”.
f Check that your Windows “SYSTEM” subdirectory contains file
“WINASPI.DLL”.
g Check that the correct pointer to the SCSI controller has been entered in
line 1 of “config.sys”: DEVICE=C:\SCSI\ASPI”x”DOS.SYS, where “x” will
depend on the version of the DOS operating system and the controller
which you are using, e.g. 2 or 4, i.e. DEVICE=C:\SCSI\ASPI4DOS.SYS.
Normally, this pointer is entered automatically if you have installed the
software for the controller with the Adaptec kit.
Bekijk gratis de handleiding van Minolta RD-175, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Minolta |
| Model | RD-175 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2236 MB |
