Miniland Digimonitor Pro 89508 handleiding

Bewakingscamera

Miniland

44 pagina's

PDF beschikbaar

Handleiding

ENGLISH

7. TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

No reception on

the monitor.

Camera not turned on.

Press the on / off button (I) and keep pressing

for at least 2 seconds.

Monitor not turned on.

Press the on / off button (1) and keep pressing

for 4 seconds.

Camera: not plugged in to the

power adapter.

Plug in the power adapter.

The camera has no battery. Plug in the power adapter.

Monitor: The power adapter is not

plugged.

Plug in the power adapter.

Monitor out of range.

Pull out the monitor aerial and if it is still out of

range, bring the monitor closer to the camera.

Connection lost between the

monitor and a camera already

linked.

Extend the antenna (15) of the monitor, and in

case it is still out of range move the monitor closer

to the camera. Check section: 5.2.4.

A wrong camera has been selected.

Change the camera number you are watching.

See 5.2.6.

Unable to charge

the battery to the

parent unit.

AC/DC adapter is not plugged in. Plug in the power adapter.

Only black and

white images are

displayed.

Check whether the camera is in

night vision/infrared mode.

In order to view the images in colour, increase

the level of light in the room the camera is in or

check there is nothing covering the camera´s light

sensor (II).

The camera does

not turn on.

The camera has no battery. Plug in the power adapter.

The camera is not

transmitting.

The camera has not been turned on.

Press the on / off button on the camera (I) and

keep pressing for 2 seconds.

Camera: power adapter not

plugged in.

Plug in the power adapter.

VOX mode or standby mode is

activated.

To view the monitored area continuously, switch

off the VOX mode or power saving mode on

the monitor.

The camera has no battery. Plug in the power adapter.

The camera battery

cannot be charged.

The AC/DC adapter is not

plugged in.

Plug in the power adapter.

Interference or

unsatisfactory

reception.

Other electronic devices may be

interfering with the signal.

Move them away from the device.

The camera and monitor may be

too far apart.

Extend the antenna (15) of the monitor, and

in case it is still out of range move the monitor

closer to the camera.

The battery charge level may be

too low.

Plug in the power adapter.

The camera or monitor may be too

close to many metal objects.

Move them away from the device.

Bekijk gratis de handleiding van Miniland Digimonitor Pro 89508, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.