Miniland Digimonitor Easy 89506 handleiding

Bewakingscamera

Miniland

36 pagina's

PDF beschikbaar

Handleiding

ENGLISH

4. Press the OK zoom button (10).

5. The scan mode icon (C) will be displayed at the top

of the screen to indicate that it is activated.

Note 1: If one of the cameras is out of range, has no

battery or is not switched on, the monitor will warn

you and the main screen will be displayed during

that period of time.

Note 2: To cancel scan mode, follow the same

steps described above and select from the options

available: see camera 1, see camera 2.

6. MAINTENANCE

• Clean the surfaces of the camera and monitor with

a soft, lint-free cloth.

• If the units become dirty, use a lightly dampened

cloth to wipe surfaces, taking care to not allow water

into any openings.

• Never use cleaning agents or solvents.

7. TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

No reception on

the monitor.

Camera not turned on.

Press the on / off button (I) and keep pressing

for at least 2 seconds.

Monitor not turned on.

Press the on / off button (1) and keep pressing

for 4 seconds.

Camera: not plugged in to the

power adapter.

Plug in the power adapter.

Monitor: The power adapter is not

plugged.

Plug in the power adapter.

Monitor out of range.

Pull out the monitor aerial and if it is still out of

range, bring the monitor closer to the camera.

Connection lost between the

monitor and a camera already

linked.

Extend the antenna (15) of the monitor, and in

case it is still out of range move the monitor closer

to the camera. Check section: 5.2.4.

A wrong camera has been selected.

Change the camera number you are watching.

See 5.2.6.

Unable to charge

the battery to the

parent unit.

AC/DC adapter is not plugged in. Plug in the power adapter.

Only black and

white images are

displayed.

Check whether the camera is in

night vision/infrared mode.

In order to view the images in colour, increase

the level of light in the room the camera is in or

check there is nothing covering the camera´s light

sensor (II).

The camera is not

transmitting.

The camera has not been turned on.

Press the on / off button on the camera (I) and

keep pressing for 2 seconds.

Camera: power adapter not

plugged in.

Plug in the power adapter.

VOX mode or standby mode is

activated.

To view the monitored area continuously, switch

off the VOX mode or power saving mode on

the monitor.

Interference or

unsatisfactory

reception.

Other electronic devices may be

interfering with the signal.

Move them away from the device.

The camera and monitor may be

too far apart.

Extend the antenna (15) of the monitor, and

in case it is still out of range move the monitor

closer to the camera.

The battery charge level may be

too low.

Plug in the power adapter.

The camera or monitor may be too

close to many metal objects.

Move them away from the device.

Bekijk gratis de handleiding van Miniland Digimonitor Easy 89506, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.