Miniland Digimonitor 89179 handleiding
Handleiding
Je bekijkt pagina 15 van 60
15
ENGLISH
camera with the monitor again.
Note: Before starting the pairing process, make sure that the camera and the monitor are close
to each other.
Note 2: Each camera can be linked just with one monitor at a time.
Nota 3: If the monitor and the camera, for some reason, have left the factory without being
paired, you will have to do it manually adding the camera to channel 2, 3 or 4. You won’t be able
to pair the camera again with channel 1 until you have paired it in another channel and remove
the channel 1 camera.
5.2.7. DELETE CAMERA
To delete one of the cameras connected, follow the next steps:
1. Press the MENU/Back key and the menu icon will pop up.
2. Press UP key or DOWN key to select DELETE camera icon then press OK key enter
into the sub-menu.
3. Press UP /DOWN key to select the desired camera to delete and press the key.
4. Press UP /DOWN key to select BACK icon or DELETE icon then press key.
Note 1: If you only have one camera paired to the monitor, you won’t be able to remove it.
Note 2: A channel needs to be deleted before pairing to a new camera unit.
6. MAINTENANCE
· Clean the surfaces of the camera with a soft, lint-free cloth.
· If the unit becomes dirty, use a lightly dampened cloth to wipe surfaces, taking care to not allow
water into any openings.
· Never use cleaning agents or solvents.
7. TROUBLESHOOTING
Problem Possible Cause Solution
No reception on the
monitor
Camera not turned on Press and hold down button (III) for
2 seconds
Monitor not turned on Press and hold down the Power
button (10)
Camera: not plugged in to the
power adapter
Plug in the power adapter
Monitor: The power adapter is
not plugged
Plug in the power adapter
Monitor out or range Move the monitor closer to the
camera
Connection lost between the
monitor and a camera already
linked
Link the camera with the monitor
again. See 5.2.6.
A wrong camera has been
selected
Change the camera number you are
watching. See 5.2.4.
Only black and white
images are displayed
Check whether the camera is
in night vision/infrared mode
In order to view the images in colour,
increase the level of light in the room
the camera is in or check there is
nothing covering the camera´s light
sensor (II).
Bekijk gratis de handleiding van Miniland Digimonitor 89179, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Miniland |
| Model | Digimonitor 89179 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 6432 MB |
