Milwaukee M18 3019-20PS handleiding
Handleiding
Je bekijkt pagina 6 van 24
6
OPERATION
WARNING
Ensure trigger handle lock-on is
not engaged before turning ON
tool.
Trigger Lock-On
(Cat. No. 49-16-19PS)
Use trigger lock-on when spraying for an extended
period of time or when covering a large area.
1. To lock-on, pull the trigger and push in the lock-
on button.
2. To release the lock-on, pull the trigger and release
the trigger.
NOTE: Ensure the trigger is not locked on before
turning the sprayer o to avoid accidental spraying
when the sprayer is restarted.
Trigger
Lock-On
Trigger Lock-O
Trigger Lock-O
(Cat. No. 49-16-19PS)
To avoid accidental spraying, lock-o the trigger.
1. Hook the lock-o tab onto the hook under the
trigger.
2. To release, push the tab back into the trigger.
Priming the Pump
Before initial use of either tank or after long term
storage, the pump must be primed.
1. Remove tank from base.
2. Fill tank with clean water.
3. Install the tank.
4. Install the battery pack. Close and latch the battery
compartment.
5. Turn on sprayer, turn the ow rate dial to 5, and
begin spraying for up to 30 seconds or until there
is a continuous ow.
Filling the Pesticide Sprayer Tank
(Cat. No. 49-16-19PS)
WARNING
Before lling the tank, remove
the tank from the base.
Ensure battery door is closed and latched when-
ever chemicals are present.
Mix chemicals per manufacturer's instructions.
Failure to follow instructions may cause harsh
chemicals to injure user or damage tool.
A removable strainer prevents debris that can clog
or damage the pump from entering the tank. Label
tank contents accordingly during each use. Only
put recommended liquids in tank. Only use water in
water supply tank.
1. WARNING! Remove battery to avoid starting the tool.
2. Ensure the battery door is closed securely.
3. Remove the tank from the base and
set on a level surface away from the
base to prevent exposing the base
to harsh chemicals.
4. Unscrew and remove the tank cap;
ensure strainer is in place.
5. Fill the tank (up to 4 gallons; do not
overll). Use the gallon markings
on the side of the tank as a guide.
6. Reinstall the tank cap.
7. Reinstall the tank.
Installing the Tank
1. WARNING! Remove battery to avoid starting the tool.
2. Ensure the battery door is closed securely.
3. Slide tank hooks into base and seat tank into tank
reservoir in the base.
4. Secure tank to base with front tank latches; ensur-
ing the tank is level, rmly seated, and all seals
are aligned.
WARNING
When lled, the sprayer will be
heavy, take care when putting on
the backpack to avoid strain.
Putting on the Backpack
1. Ensure tank is securely attached to base with front
buckles, tank lid is installed, and battery compart-
ment door is latched.
2. Pick up the backpack by one of the shoulder straps,
slide your arms through each shoulder strap.
3. With the sprayer on your back, tighten the shoulder
and waist straps until they t snugly and securely,
high on your back. Connect chest strap.
4. Be sure the shoulder, chest, and waist straps are
tight but comfortable; if they are too loose, the
sprayer may slide around on your back, making it
uncomfortable to wear.
5. Be aware tank contents may shift during use and
movement, such as twisting or bending over.
Bekijk gratis de handleiding van Milwaukee M18 3019-20PS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Milwaukee |
| Model | M18 3019-20PS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4434 MB |
