Milwaukee M12 PCSS54 handleiding

Niet gecategoriseerd

Milwaukee

41 pagina's

PDF beschikbaar

Handleiding

18 19

M12 PCSS54

5036 00 01 XXXXXX MJJJJ

12 V

35 mm, 42 mm, 54 mm

1,5 mm

2,9 ... 3,1 kg

-18...+50 °C

M12B…; M12HB…

C12C, M12C4, M12-18…

85 dB(A) / 3 dB(A)

93 dB(A) / 3 dB(A)

3,4 m/s

/ 1,5m/s

ENGLISH

TECHNICAL DATA

Type

Production code

Battery voltage

Pipe diameter

Max. Pipe Wall thickness

Weight according EPTA-Procedure 01/2014 (2.0 ... 6.0 Ah)

Recommended ambient operating temperature

Recommended battery types

Recommended charger

Noise information:

Measured values determined according to EN 62841.

Typically, the A-weighted noise levels of the tool are:

Sound pressure level / Uncertainty K

Sound power level / Uncertainty K

Always wear ear protectors!

Vibration information: Total vibration values (vector sum in the three axes)

determined according to EN 62841.

Vibration emission value a

/ Uncertainty K

WARNING Read all safety warnings, instructions, illustrations and

speciﬁ cations provided with this power tool. Failure to follow all instructions

listed below may result in electric shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS

Wear ear protectors. Exposure to noise can cause hearing loss.

Always wear goggles when using the machine. It is recommended to wear

gloves, sturdy non slipping shoes and apron.

Keep hands and loose clothes away from all cutting edges and moving parts.

To reduce the risk of explosion, electric shock and property damage, never cut

gas lines, electrical lines, or full water lines. Shut oﬀ water and drain lines before

making a cut.

To reduce the risk of injury, wear gloves when cutting. Cut tubing can be sharp.

Do not hold end of tubing. Cutter will rotate tubing when trigger is pulled creating

a laceration hazard.

Do not remove or insert the workpiece without returning the carriage to the open

position. Inserting / removing workpieces while the carriage is in the cutting

position can damage the cutting wheel and jaws.

Switch the device oﬀ immediately if the cutting mechanism stalls! Do not switch

the device on again while the cutting wheel is stalled, as doing so could trigger a

sudden recoil with a high reactive force. Determine why the cutting wheel stalled

and rectify this, paying heed to the safety instructions.

The possible causes may be:

• the workpiece is tilted

• the workpiece jams in the mechanism

• the power tool is overloaded

Do not reach into the machine while it is running.

The cutting wheel and workpiece may become hot during use.

WARNING! Danger of burns

• when changing cutting wheels

• when setting the device down

Remove the battery pack before starting any work on the machine.

Do not dispose of used battery packs in the household refuse or by burning

them. Milwaukee Distributors oﬀ er to retrieve old batteries to protect our

environment.

Do not store the battery pack together with metal objects (short circuit risk).

Use only compatible Milwaukee chargers from the same battery platform for

charging batteries. Do not use batteries from other systems.

Battery acid may leak from damaged batteries under extreme load or extreme

temperatures. In case of contact with battery acid wash it oﬀ immediately with

soap and water. In case of eye contact rinse thoroughly for at least 10 minutes

and immediately seek medical attention.

Warning! To reduce the risk of ﬁ re, personal injury, and product damage due to

a short circuit, never immerse your tool, battery pack or charger in ﬂ uid or allow

a ﬂ uid to ﬂ ow inside them. Corrosive or conductive ﬂ uids, such as seawater,

certain industrial chemicals, and bleach or bleach containing products, etc., can

cause a short circuit.

SPECIFIED CONDITIONS OF USE

The pipe cutter is designed for cutting stainless steel, galvanized steel and

copper pipe.

Do not work on pieces of tubing less than 20 mm long. Small or bent pieces can

be pulled into the jaws of the cutting tool and damage it.

Do not use this product in any other way as stated for normal use.

WARNING!

The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in EN 62841 and may be used

to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for diﬀ erent applications, with diﬀ erent

accessories or poorly maintained, the vibration and noise emission may diﬀ er. This may signiﬁ cantly increase the exposure level over the total working period.

An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched oﬀ or when it is running but not actually

doing the job. This may signiﬁ cantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the eﬀ ects of vibration and/or noise such as: maintain the tool and the accessories, keep the hands

warm, organization of work patterns.

Pipe Cutter

ENGLISH

RESIDUAL RISK

Even when the product is used as prescribed, it is still impossible to completely

eliminate certain residual risk factors. The following hazards may arise in use

and the operator should pay special attention to avoid the following:

• Injury caused by vibration

Hold the product by designated handles and restrict working time and

exposure.

• Exposure to noise can cause hearing injury.

Wear ear protection and limit exposure.

• Injury due to ﬂ ying debris

Wear eye protection, heavy long trousers, gloves and substancial footwear

at all times.

• Inhalation of toxic dusts.

NOTES FOR LI-ION BATTERIES

Use of Li-Ion batteries

Batteries which have not been used for some time should be recharged before

use.

Temperatures in excess of 50°C reduce the performance of the battery. Avoid

extended exposure to heat or sunshine (risk of overheating).

The contacts of chargers and battery packs must be kept clean.

For an optimum life-time, the batteries have to be fully charged, after used.

To obtain the longest possible battery life remove the battery pack from the

charger once it is fully charged.

For battery storage longer than 30 days:

Store the battery where the temperature is below 27°C and away from moisture

Store the battery in a 30% - 50% charged condition

Every six months of storage, charge the battery as normal.

Battery protection for Li-Ion batteries

In extremely high torque, binding, stalling and short circuit situations that cause

high current draw, the tool will vibrate for about 5 seconds, the fuel gauge will

ﬂ ash,and then the tool will turn OFF. To reset, release the trigger.

Under extreme circumstances, the internal temperature of the battery could

become too high. If this happens, the fuel gauge will ﬂ ash and the battery pack

cool and then continue work.

Transport of Li-Ion batteries

Lithium-ion batteries are subject to the Dangerous Goods Legislation

requirements.

Transportation of those batteries has to be done in accordance with local,

national and international provisions and regulations.

• The user can transport the batteries by road without further requirements.

• Commercial transport of Lithium-Ion batteries by third parties is subject to

Dangerous Goods regulations. Transport preparation and transport are

exclusively to be carried out by appropriately trained persons and the process

has to be accompanied by corresponding experts.

When transporting batteries:

• Ensure that battery contact terminals are protected and insulated to prevent

short circuit.

• Ensure that battery pack is secured against movement within packaging.

• Do not transport batteries that are cracked or leak.

Check with forwarding company for further advice

CLEANING

The ventilation slots of the machine must be kept clear at all times.

MAINTENANCE

Use only Milwaukee accessories and Milwaukee spare parts. Should

components need to be replaced which have not been described, please

contact one of our Milwaukee service agents (see our list of guarantee/service

addresses).

If needed, an exploded view of the tool can be ordered. Please state the

machine type printed as well as the six-digit No. on the label and order the

drawing at your local service agents or directly at: Techtronic Industries GmbH,

Max-Eyth-Straße 10, 71364 Winnenden, Germany.

SYMBOLS

Please read the instructions carefully before starting the

machine.

CAUTION! WARNING! DANGER!

Remove the battery pack before starting any work on the

machine.

Always wear goggles when using the machine.

Wear gloves!

Keep hands away from all cutting edges and moving parts.

Fingers can be pulled into cutting carriage and be cut or crushed.

Carriage open.

Cutting

Lock

Accessory - Not included in standard equipment, available as

an accessory.

Do not dispose of waste batteries, waste electrical and electronic

equipment as unsorted municipal waste. Waste batteries and

waste electrical and electronic equipment must be collected

separately.

Waste batteries, waste accumulators and light sources have to

be removed from equipment.

Check with your local authority or retailer for recycling advice and

collection point.

According to local regulations retailers may have an obligation

to take back waste batteries and Waste electrical and electronic

equipment free of charge.

Your contribution to re-use and recycling of waste batteries and

waste electrical and electronic equipment helps to reduce the

demand of raw materials.

Waste batteries, in particular containing lithium and waste

Electrical and electronic equipment contain valuable, recyclable

materials, which can adversely impact the environment and

the human health, if not disposed of in an environmentally

compatible manner.

Delete personal data from waste equipment, if any.

Voltage

Direct Current

European Conformity Mark

UK Conformity Mark

Ukraine Conformity Mark

EurAsian Conformity Mark

Bekijk gratis de handleiding van Milwaukee M12 PCSS54, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.