Milwaukee M12 2323-21 handleiding
Handleiding
Je bekijkt pagina 4 van 16
4
Camera LED Brightness
Once the tool is turned On, press the power button
to cycle through the levels of brightness or turn it
O. The level of brightness
is displayed on the
LCD.
Zoom Button
Press the zoom button to cycle through the 3 zoom
levels. The level of zoom is displayed on the LCD.
180
Rotate Button
Press the
180
button to rotate the LCD image 180º.
Push the
180
button again to return the image to its
original position.
Save Photo Button
Press the button to save a photo of the current
view of the LCD screen.
Record Video Button
Press the button to start recording the current
view of the LCD screen. Press the
button again
to stop recording.
Taking Photos/Videos
1. Adjust the cable to best t the opening. After
checking the workspace for hazards, insert the
cable.
2. Use the
button to zoom in or out on the image.
3. Use the
180
button to rotate the image 180°.
4. Use the power button
to increase/decrease the
camera LED brightness.
5. To save a photo, press the
button.
6. To record a video, press the
button.
NOTE: During a video recording, REC displays
on the LCD and the timecode starts counting up.
7. To end the video, press
.
Gallery Mode
NOTE: When in gallery mode,
button actions change to their
secondary functions to allow for
navigation, playback, pause,
and deletion purposes.
1. Press the
button to enter gallery mode to view
photos and videos saved on the SD card.
2. The number of saved photos/videos is displayed
on the top of the LCD screen.
2/50
3. While in gallery mode, use the
buttons to move
through the stored photos/videos.
4. Press the
button to play a saved video.
5. While a video is playing, press the
button to
pause.
6. To delete a photo/video, press the
button then
press the
button again to conrm the deletion.
7. To cancel a deletion, press the
button.
8. To exit gallery mode, press the
button.
Battery Level
Replace the battery pack when low. The level of
battery is displayed in the upper right corner of the
LCD screen.
Formatting a New Memory Card
The camera comes preinstalled with a memory card
formatted to FAT32. The
indicator will display if a
memory card is inserted that is not formatted to
FAT32. Memory cards must be formatted to FAT32.
NOTE: Formatting will erase all photos and videos
contained on that memory card.
To format a memory card to FAT32, press the
button twice. The
indicator will display until format-
ting is completed and the tool will turn o.
Attaching/Removing Accessories
To attach an accessory, snap the clips into the de-
tents at the end of the cable. To remove, unclip and
pull away from the cable.
OPERATION
WARNING
To reduce the risk of injury, always
wear proper eye protection marked
to comply with ANSI Z87.1.
To reduce the risk of explosion, electric shock
and property damage, always check the work
area before beginning a job. Do not allow cable to
contact electrical, chemical, or moving hazards.
Behind walls: Shut o circuit breakers to the
entire area.
Inside pipes: Ensure there is no electrical charge
to the pipes before beginning inspection. Do not
allow liquid to ow down cable and into tool.
Vehicle use: Turn o the engine and allow to
cool before beginning inspection. Do not allow
the camera or cable to contact oil, gas, or other
corrosive materials.
NOTICE
To reduce the risk of damage to the tool,
do not use excessive force or "kink"
the cable. Do not use in areas where camera and
cable will contact corrosive or oily substances.
Do not use the cable to clear clogs or move ob-
structions. This is not a drain cleaner!
Turning On/O
When the inspection camera is turned On and the
camera is pointed at an object, the LCD screen will
show the image the lens is pointing at.
To turn On:
1. Press and hold the power button
.
2. Release the power button
when the screen
turns On.
To turn O:
1. Press and hold the power button
.
2. Release the power button
when the screen
turns O.
Bekijk gratis de handleiding van Milwaukee M12 2323-21, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Milwaukee |
| Model | M12 2323-21 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2870 MB |
