Milesight MS-C2963-RPC handleiding
Handleiding
Je bekijkt pagina 80 van 237
Milesight Network Camera User Manual | 5 - System Operation Guide | 80
Parameters Function Introduction
Enable Audio
Check on the check box to enable audio feature
Audio Input
Denoise: Set it as On/Off. When you set the function on, the noise detected can be
filtered
Encoding: G.711-ULaw, G.711-ALaw, AAC LC, G.722 and G.726 are available
Audio Bit Rate: The function is available only for AAC LC, and supports up to
256kbps
Sample Rate: 8KHz, 16KHz, 32KHz, 44.1KHz, and 48KHz are available
Input Gain: Input audio gain level, 0-100
Alarm Level: Alarm will be triggered if voice alarm is enabled and input gained volume
is higher than the alarm level, 1-100
Audio Output
Auto Gain Control: This function is only for H.265 series, improve the quality of audio
Output Volume: Adjust volume of output
Note: 32KHz, 44.1KHz and 48KHz are available for 5MP, 4K camera models and 2MP@120fps
camera models.
You can upload up to 5 audio files manually to Flash or SD Card on the Audio web page and you can
also edit the audio file’s name when upload.
Note:
• The Audio mode and Audio Output are only for certain modules.
• Only support ‘.wav’ audio files with codec type PCM/PCMU/PCMA, 64kbps or 128 kbps and
no more than 500k.
Bekijk gratis de handleiding van Milesight MS-C2963-RPC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Milesight |
| Model | MS-C2963-RPC |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 42995 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, White |
| Gewicht | 750 g |
| Soort | IP-beveiligingscamera |
| Internationale veiligheidscode (IP) | IP67 |
| Ondersteund audioformaat | AAC, AWB, G.711, G.722, G.726 |
