Miele WEJ885 WCS handleiding
Handleiding
Je bekijkt pagina 20 van 92
Before using for the first time
20
Push the UltraPhase2 detergent
cartridge into compartment2 until it
locks into position.
When the cartridge is pushed in, the
message in the display changes to:
“TwinDos” is set. Can be changed in “Set-
tings”.
Confirm with the OKsensor control.
Close the TwinDos access panel.
5. Starting the calibration pro-
gramme
For optimum water and energy con-
sumption and excellent wash results, it
is important to calibrate the washing
machine.
To do this, the Cottonsprogramme
must be run without laundry and
without detergent.
No other programmes can be started
until calibration has been carried out.
The following message appears in the
display: Open and run “Cottons 90°C”
without laundry.
Touch the sensor control until the
OKsensor control lights up and con-
firm with OK.
1:55
OK
90°
1600
Open the stopcock.
Touch the Start/Add laundrysensor
control.
The calibration programme then starts.
It will take approximately 2hours.
At the end of the programme, the fol-
lowing message will appear in the dis-
play: Set up complete
Reach under the door grip and pull
the door open.
Tip: Leave the door slightly open to al-
low the drum to dry.
Turn the programme selector to the
position.
Bekijk gratis de handleiding van Miele WEJ885 WCS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Miele |
| Model | WEJ885 WCS |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 11051 MB |
