Handleiding
Je bekijkt pagina 22 van 80
Energy saving tips
22
This dryer with heat-pump technology
is designed for energy-saving drying
cycles. However, you can save a little
more energy with the following meas-
ures as the drying time is not extended
unnecessarily.
- Make sure your laundry is spun at the
maximum spin speed before drying.
The higher the spin speed, the greater
the savings that can be made in en-
ergy and time during drying, e.g. ap-
prox. 20% energy can be saved if
spun at 1600rpm instead of
1000rpm.
- Always dry using the maximum spe-
cified load size for the programme
whenever possible. A full drum helps
to save energy because you don’t
have to start another drying pro-
gramme. This will mean that the en-
ergy consumption for the amount of
laundry is at its most economical.
- Make sure that the room temperature
is not too high. If there are other heat
producing appliances in the room in
which the dryer is located, make sure
the room is well ventilated and switch
the other appliances off, if possible.
- Clean the fluff filters in the door open-
ing after every drying cycle.
Please refer to “Cleaning and care” for
information on cleaning the fluff filters
and the plinth filter.
- If possible, make use of time-variable,
low-cost electricity tariffs. Ask your
energy supplier for information. Your
tumble dryer's delay start function will
be useful as you can select when dur-
ing the next 24 hours you want drying
to start automatically.
Bekijk gratis de handleiding van Miele TEC645WP EcoSpeed, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Miele |
| Model | TEC645WP EcoSpeed |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 8896 MB |
