Handleiding
Je bekijkt pagina 44 van 72
Problem solving guide
44
Problem Cause and remedy
and flash, a signal
sounds.
The indicator light
comes on.
The system has been clogged by fluff or detergent
residue.
To deactivate the message, turn the programme se-
lector to the position.
Clean the fluff filters and the plinth filter.
– Please see “Cleaning and care” for notes on
cleaning.
– If the fluff filters and the plinth filter are damaged
or out of shape, or if they cannot be cleaned,
they must be replaced.
– If the fault message is displayed again after
cleaning, this could be due to one of the causes
listed below.
The plinth filter was too wet when it was fitted.
Carefully squeeze the water out of the plinth filter.
Leave the plinth filter to air-dry.
There is still underlying residue in the plinth filter that
could not be removed.
Check the plinth filter. Follow the instructions in
“Problem solving guide – Replacing the plinth filter”.
If the plinth filter is not damaged or out of shape,
you can reactivate it in a washing machine. Follow
the instructions in “Problem solving guide – Reactiv-
ating the plinth filter”.
The heat exchanger is clogged.
Check the heat exchanger. Follow the instructions in
“Problem solving guide – Checking the heat ex-
changer”.
Bekijk gratis de handleiding van Miele TEA525WP Active, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Miele |
| Model | TEA525WP Active |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 7786 MB |
