Handleiding
Je bekijkt pagina 67 van 80
Cleaning and care of the oven
67
Starting Self Clean at a later time
Start the Self Clean program as
described above and then set the
required finish time within the first five
minutes of starting the program.
Select OK.
Move the triangle with or until
it appears under .
appears.
Confirm with OK.
The display will show the finish time
calculated from the current time of day
plus the duration of the selected Self
Clean program.
Set the desired finish time using or
.
Confirm with OK.
The finish time is now saved.
The oven heating switches off.
The finish time can be changed at any
time up until the start time for the
program.
As soon as the start time is reached,
the oven heating and the cooling fan
will switch on. The duration will appear
in the display.
At the end of the Self Clean program
h
, , and will appear in the
display.
As long as lights up, the door is
locked. When flashes, the door is
unlocked.
When the door lock has been
deactivated:
- goes out.
- flashes.
- Short signals will sound if the audible
signal is switched on.
Turn the mode selector to (Off).
The audible signal will stop and the
symbols on the display will go out.
Danger of injury caused by hot
surfaces.
At the end of the Self Clean program,
the oven will still be very hot. You
could burn yourself on the heater
elements and the oven
compartment.
Allow the heating elements and the
oven compartment temperature to
drop to a safe level before removing
any residues.
Clean the oven compartment to
remove any Self Clean residues (e.g.,
ash) that can build up depending on
the degree of soiling in the oven
compartment.
Bekijk gratis de handleiding van Miele HR 1724-3 DF LP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Miele |
| Model | HR 1724-3 DF LP |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5993 MB |
