Miele G 7085 SCVi XXL handleiding
Handleiding
Je bekijkt pagina 28 van 116
Before using for the first time
28
Refilling salt
When the refill reminder Refill salt
appears in the display, wait until the
end of the programme and then refill
the salt reservoir.
Confirm with OK.
The salt refill indicator will go out.
Risk of corrosion due to saline
solution.
Saline solution that runs out can
cause corrosion in the wash cabinet
and to the load items.
Immediately after filling the salt
reservoir and each time you remove
the salt reservoir cap, run the Rinse
salt programme without load items in
the dishwasher to dissolve and re-
move any traces of salt from the
wash cabinet.
After the salt reservoir has been filled,
the salt refill indicator may still appear
on the display if the salt concentration
has not yet reached the correct level. In
this case, confirm the message again
with OK.
The salt refill indicator will be switched
off if you have programmed the dish-
washer for a water hardness below
0.9mmol/l (5°dH – German scale).
Bekijk gratis de handleiding van Miele G 7085 SCVi XXL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Miele |
| Model | G 7085 SCVi XXL |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 12824 MB |
